please check my cal

K-Series Programmable ECU Calibration updates / downloads
Post Reply
dercanbonlyone
Posts: 6
Joined: Sat Mar 02, 2019 11:12 am

please check my cal

Post by dercanbonlyone »

04rsxs pray 3cams k2024 na frank.
You do not have the required permissions to view the files attached to this post.
dercanbonlyone
Posts: 6
Joined: Sat Mar 02, 2019 11:12 am

Re: please check my cal

Post by dercanbonlyone »

Two minutes and twenty seconds in it begins to miss and slightly bog. Then really bad at 2 minutes fifty seconds.
Also I have 440 injectors and bored cylinders to 88mm. Nothing new to the tune since dynatune at speed factory but since then is now falling apart. Perhaps corrupt tune
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: please check my cal

Post by Spunkster »

You should take it back to the tuner and have them take a look at it.
dercanbonlyone
Posts: 6
Joined: Sat Mar 02, 2019 11:12 am

Re: please check my cal

Post by dercanbonlyone »

Unfortunately the person that originally tuned mine over at speed factory no longer works there because it was quite a while ago but they said they had my file on tune and it's the exact same one that I currently have now so it can't be that. But thanks for the reply and advice.
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: please check my cal

Post by Spunkster »

They may still need to take a look at things as there could be a mechanical issue.
dercanbonlyone
Posts: 6
Joined: Sat Mar 02, 2019 11:12 am

Re: please check my cal

Post by dercanbonlyone »

Ok. I'll keep trying to appeal to their better nature. I understand you guys aren't miracle workers with every answer but I still appreciate and value your input. I know nothing.
MondeCruel
Posts: 49
Joined: Wed Sep 07, 2022 9:51 am

Re: please check my cal

Post by MondeCruel »

I watched the log, your map sensor is working ok ?
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: please check my cal

Post by CalibratEd »

Double check your Intake Air Temperature sensor. Throughout the whole log it was reading 43 degrees. This value should change as the car warms up.
If possible post a part throttle log.

- Ed
Instagram: calibrated.tuning
dercanbonlyone
Posts: 6
Joined: Sat Mar 02, 2019 11:12 am

Re: please check my cal

Post by dercanbonlyone »

Yes my map was fine I tried three new ones honestly but I bought three of them they all read good. Also Aaron take temperature sensor was new but I could try another one just cuz couldn't hurt wouldn't be the first time I bought something new that was broken
dercanbonlyone
Posts: 6
Joined: Sat Mar 02, 2019 11:12 am

Re: please check my cal

Post by dercanbonlyone »

Also it's piss cold out here right now That's in the middle of the night with my hood up
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: please check my cal

Post by CalibratEd »

dercanbonlyone wrote: Wed Dec 13, 2023 4:50 pm Also it's piss cold out here right now That's in the middle of the night with my hood up
Oh ok. Post a part throttle log.

- Ed
Instagram: calibrated.tuning
Post Reply