VTEC Question

FlashPro questions & answers specific to the 2008+ Accord, Americas and international
Post Reply
rainy187
Posts: 48
Joined: Wed Nov 09, 2022 12:26 pm

VTEC Question

Post by rainy187 »

I bought the hondata mobile app to check my car.
I am not sure if this is how it is supposed to be.
each time shifts into 3rd gear, VTEC status will show it turned on. regardless of which RPM or how slow i drive.
Even when i am going 30 mph and shift into 3rd gear, then the status is on. down shift to 2nd or let go gas it goes off.
this made me wonder the setting in the flashpro manager "VTEC window rpm" is for?

2018 Accord 2.0 AT
User avatar
Spunkster
Site Admin
Posts: 23872
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: VTEC Question

Post by Spunkster »

Post your calibration and a datalog showing the issue.
rainy187
Posts: 48
Joined: Wed Nov 09, 2022 12:26 pm

Re: VTEC Question

Post by rainy187 »

as you can you my RPM never went over 4000, but VTS turns on each time it goes into 3rd gear. It goes off when i let go the gas pedal (TPedal 0%)
is this how VTEC Spool worked? i thought VTEC kicks in when its under high load or WOT.
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 23872
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: VTEC Question

Post by Spunkster »

It appears to be normal.
rainy187
Posts: 48
Joined: Wed Nov 09, 2022 12:26 pm

Re: VTEC Question

Post by rainy187 »

is it really normal that VTEC kicks in at 3rd gear regardless of your VSS or RPM?
so i do another test, i put in sports mode at keep the car at 2nd gear, RPM over 5000 the result is.. no VTEC
You do not have the required permissions to view the files attached to this post.
Post Reply