need help with a tune

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

need help with a tune

Post by ibarra1557 »

i have a 98 integra lsvtec build, Has a B18c5 head on a B18b1 bottom end
Mod List:
-Cold air intake
-Forged weisco pistons
-Forged eagle rods
-10:5:1 comp
-Bore 81.5 i believe
-Brian Crower valvetrain
-Brian Crower stage 2 Boost cams
-Toda Cam gears
-Supertech titanium valve springs and retainers
-Head was ported and polished
-Acl rod and main bearings kit
-Arp Studs
-Cometic Head Gasket
-Gsr water pump and belt
-Act six puck clutch extreme
-Gsr trans hydro

Has stock injectors Let me know if you can help thanks!
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

ibarra1557 wrote: Sat Sep 09, 2023 9:36 pm i have a 98 integra lsvtec build, Has a B18c5 head on a B18b1 bottom end
Mod List:
-Cold air intake
-Forged weisco pistons
-Forged eagle rods
-10:5:1 comp
-Bore 81.5 i believe
-Brian Crower valvetrain
-Brian Crower stage 2 Boost cams
-Toda Cam gears
-Supertech titanium valve springs and retainers
-Head was ported and polished
-Acl rod and main bearings kit
-Arp Studs
-Cometic Head Gasket
-Gsr water pump and belt
-Act six puck clutch extreme
-Gsr trans hydro

Has stock injectors Let me know if you can help thanks!
rg1721
Posts: 7
Joined: Sat Dec 03, 2022 8:09 pm

Re: need help with a tune

Post by rg1721 »

Hey i can recommend a tuner guy, look him up on fb his name is mohammaed nabil , nabil tuned hes done mine and its been well
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

thanks!
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

update, Added tri y headers to full straight pipe exhaust 3"
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

Files for you
You do not have the required permissions to view the files attached to this post.
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: need help with a tune

Post by CalibratEd »

Are you running a wideband?

-Ed
Instagram: calibrated.tuning
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

Not yet putting in today or tomorrow been super busy with work
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: need help with a tune

Post by CalibratEd »

No worries. Sounds good.

- Ed
Instagram: calibrated.tuning
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

hers a update
You do not have the required permissions to view the files attached to this post.
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: need help with a tune

Post by CalibratEd »

ibarra1557 wrote: Wed Oct 18, 2023 4:45 pm hers a update
The car is running a bit rich in Vtec. That's all I can gather as its a very short datalog.

- Ed
Instagram: calibrated.tuning
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

this is a tune log with wideband installed when cruising it runs at 15 sometimes 14s on afr
You do not have the required permissions to view the files attached to this post.
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

also have these hope they help ill do one tomorrow at cold start/ driving to work and all, Get some fresh ones
You do not have the required permissions to view the files attached to this post.
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

Fresh Data log from today these are more accurate
You do not have the required permissions to view the files attached to this post.
ibarra1557
Posts: 27
Joined: Sat Sep 09, 2023 9:10 pm

Re: need help with a tune

Post by ibarra1557 »

and 1 more
You do not have the required permissions to view the files attached to this post.
Post Reply