K24 swapped 8th gen SI basemap

[MrJumpStars]

Hi fellas! The k20z3 on my 08 civic si cracked so a shop swapped it with a jdm k24a. I bought hondata flashpro to get the engine to run normal but I'm realizing it doesn't come with a basemap for the k24 swap. Can some help me? I don't have any mods on my car - stock intake box, rbc manifold, exhaust, etc. It's all stock except for the engine. Do I need to download a basemap from this website? I'm a noob to all of this. Any help would be beyond appreciated. Thank you!

[CalibratEd]

Hi fellas! The k20z3 on my 08 civic si cracked so a shop swapped it with a jdm k24a. I bought hondata flashpro to get the engine to run normal but I'm realizing it doesn't come with a basemap for the k24 swap. Can some help me? I don't have any mods on my car - stock intake box, rbc manifold, exhaust, etc. It's all stock except for the engine. Do I need to download a basemap from this website? I'm a noob to all of this. Any help would be beyond appreciated. Thank you!

Welcome to the forum,

You select the calibration file you want to run from the software. You can choose the stock calibration, switch it to speed density and make adjustments to get it running safe until you get it properly tuned.

If you search the forums I think EFICU was working on a k24 swapped 8th. You could also use that as a start.

-Ed

[MrJumpStars]

Hi fellas! The k20z3 on my 08 civic si cracked so a shop swapped it with a jdm k24a. I bought hondata flashpro to get the engine to run normal but I'm realizing it doesn't come with a basemap for the k24 swap. Can some help me? I don't have any mods on my car - stock intake box, rbc manifold, exhaust, etc. It's all stock except for the engine. Do I need to download a basemap from this website? I'm a noob to all of this. Any help would be beyond appreciated. Thank you!

Welcome to the forum,

You select the calibration file you want to run from the software. You can choose the stock calibration, switch it to speed density and make adjustments to get it running safe until you get it properly tuned.

If you search the forums I think EFICU was working on a k24 swapped 8th. You could also use that as a start.

-Ed

Oh my god thank you! I'll try that now

[CalibratEd]

Hi fellas! The k20z3 on my 08 civic si cracked so a shop swapped it with a jdm k24a. I bought hondata flashpro to get the engine to run normal but I'm realizing it doesn't come with a basemap for the k24 swap. Can some help me? I don't have any mods on my car - stock intake box, rbc manifold, exhaust, etc. It's all stock except for the engine. Do I need to download a basemap from this website? I'm a noob to all of this. Any help would be beyond appreciated. Thank you!

Welcome to the forum,

You select the calibration file you want to run from the software. You can choose the stock calibration, switch it to speed density and make adjustments to get it running safe until you get it properly tuned.

If you search the forums I think EFICU was working on a k24 swapped 8th. You could also use that as a start.

-Ed

Oh my god thank you! I'll try that now

No problem. Just keep in mind any calibration file you use will need some adjustments as no two cars are alike.

-Ed

[MrJumpStars]

Welcome to the forum,

You select the calibration file you want to run from the software. You can choose the stock calibration, switch it to speed density and make adjustments to get it running safe until you get it properly tuned.

If you search the forums I think EFICU was working on a k24 swapped 8th. You could also use that as a start.

-Ed

Oh my god thank you! I'll try that now

No problem. Just keep in mind any calibration file you use will need some adjustments as no two cars are alike.

-Ed

I wish I knew exactly what to calibrate though. I’ll just wait and take it to the tuner. When I drove the car after uploading the tune, it shut off mid-drive, then the engine and both vsa lights came on :(

[CalibratEd]

I can help make it run safe until you get it properly tuned.

Post the calibration file and datalog.

-Ed

[MrJumpStars]

I can help make it run safe until you get it properly tuned.

Post the calibration file and datalog.

-Ed

Okay I’ll drive it around later and send everything. I appreciate the help

[CalibratEd]

Sounds good.

-Ed

[MrJumpStars]

Sounds good.

-Ed

This is the EFICU basemap I used:

Sebastian.SD.Rev02 (0Cam)(Vtec5500).fpcal

This is the datalog from 10 minutes ago:

K24..SI.Sept23.fpdl

[CalibratEd]

Sounds good.

-Ed

This is the EFICU basemap I used: Sebastian.SD.Rev02 (0Cam)(Vtec5500).fpcal

This is the datalog from 10 minutes ago: K24..SI.Sept23.fpdl

Car was running lean. I adjusted fuel.

Create another log.

-

MrJumpStars_Rev1.fpcal

Ed

[MrJumpStars]

Sounds good.

-Ed

This is the EFICU basemap I used: Sebastian.SD.Rev02 (0Cam)(Vtec5500).fpcal

This is the datalog from 10 minutes ago: K24..SI.Sept23.fpdl

Car was running lean. I adjusted fuel.

Create another log.

- MrJumpStars_Rev1.fpcalEd

While I waited I tried this tune:

Sebastian.SD.Rev14 (Blended)(Vtec4200).fpcal

This was the datalog from it:

MJS.Datalog002.EFICU.fpdl

I just uploaded your tune and I'll reply with it's datalog.

[MrJumpStars]

This is the EFICU basemap I used: Sebastian.SD.Rev02 (0Cam)(Vtec5500).fpcal

This is the datalog from 10 minutes ago: K24..SI.Sept23.fpdl

Car was running lean. I adjusted fuel.

Create another log.

- MrJumpStars_Rev1.fpcalEd

While I waited I tried this tune: Sebastian.SD.Rev14 (Blended)(Vtec4200).fpcal

This was the datalog from it: MJS.Datalog002.EFICU.fpdl

I just uploaded your tune and I'll reply with it's datalog.

Here is the new tune:

MJS.Datalog001.CalibratED.fpdl

[CalibratEd]

Fuel is good and no knock is present. This should be good to normal drive (no WOT) until you get it properly tuned.
Reach out when you're ready for a full Etune if you don't already have a tuner. My info should be in the calibration file.

- Ed

[MrJumpStars]

Fuel is good and no knock is present. This should be good to normal drive (no WOT) until you get it properly tuned.
Reach out when you're ready for a full Etune if you don't already have a tuner. My info should be in the calibration file.

- Ed

Thanks Ed! I couldn't have done this without you! You're the man!!

[CalibratEd]

I’m glad I could help.

-Ed