Help!!! No start after turn off help!!!

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Post Reply
Devoix
Posts: 25
Joined: Thu Jun 18, 2020 2:49 pm
Location: Charleston, Wv

Help!!! No start after turn off help!!!

Post by Devoix »

Hey I have an 08 civic si it will start when cold but anytime after it has ran at any amount of time it will not restart it has spark when it’s doing this and you can dump ether in it and it doesn’t matter it will just crank and crank… no codes no nothing I unplugged the battery, reflashed the tune and everything nothing helps what the heck is wrong ???
Devoix
Posts: 25
Joined: Thu Jun 18, 2020 2:49 pm
Location: Charleston, Wv

Re: Help!!! No start after turn off help!!!

Post by Devoix »

Ok now it wolnt even start at all I’ve thrown different plugs at it, ether at it, im fairly sure its not the timing bc It runs when it actually starts… now its just not starting at all.
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Help!!! No start after turn off help!!!

Post by Spunkster »

Post the calibration used and a datalog made using that calibration that shows the issue.
Devoix
Posts: 25
Joined: Thu Jun 18, 2020 2:49 pm
Location: Charleston, Wv

Re: Help!!! No start after turn off help!!!

Post by Devoix »

Ok so I’ll go out and turn the car on hit data log, and let it go for like 20 sec and then save and post that hang on
Devoix
Posts: 25
Joined: Thu Jun 18, 2020 2:49 pm
Location: Charleston, Wv

Re: Help!!! No start after turn off help!!!

Post by Devoix »

ok here ya go... i was pushing the accel trying to get it to start just so you know... lol everything else... not me besides crank...
You do not have the required permissions to view the files attached to this post.
Devoix
Posts: 25
Joined: Thu Jun 18, 2020 2:49 pm
Location: Charleston, Wv

Re: Help!!! No start after turn off help!!!

Post by Devoix »

Ok from what I saw it looked like it wasn’t even seeing the cam sensors ????
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: Help!!! No start after turn off help!!!

Post by CalibratEd »

Post the calibration and datalog of it at cold start. Once its warm does it die? does it only have trouble when you restart it after it has warmed up.

-Ed
Instagram: calibrated.tuning
Devoix
Posts: 25
Joined: Thu Jun 18, 2020 2:49 pm
Location: Charleston, Wv

Re: Help!!! No start after turn off help!!!

Post by Devoix »

I’ll post the calibration in a sec I gotta go read the ecu and save it and I’ll post that but now, it refuses to start period :( not even cold ?? Go figure ??
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: Help!!! No start after turn off help!!!

Post by CalibratEd »

Sounds good.

-Ed
Instagram: calibrated.tuning
Post Reply