K20a2 00Ek tuned/calibration

[JaviBori1]

Sorry in advance if I post it in the wrong spot but I need help with my swap.
After rebuilding the top end of the engine and put it all back together and taking it for a ride down the street back-and-forth I keep getting a knock sensor code. I have not tuned the car yet I just want to make sure everything is 100% good before I take it to the tuner
And another lil problem is battery light starts dimming light to bright lil by lil 🤷🏽‍♂️

And yes this is my first Kswap ever 😑

96-00 Honda Civic Mandrel Exhaust by TruBendz - 3" Aluminized Steel Tubing

K Series K20 K24 Megaphone Pipe Header Exhaust 3" 4-1 Tri-Y EK EG DC2 Civic V Band Down Pipe

SKUNK2 TUNER STAGE 1 ONE CAMS CAMSHAFTS FOR ACURA RSX TSX HONDA CIVIC SI K20 K24

Skunk2 Pro Series Intake Manifold for Honda EP3/DC5 K20A K20A2 K20Z1 K24A1 Swap

Skunk2 Alpha Series Valve Springs and Ti Retainers K20 K20A2 K20Z1 K20A3 K24A4

ACUITY Throttle Position Sensor TPS HALL EFFECT FOR R$X-S EP3 CIVIC SI K20 1879

K-Tuned 4 BAR MAP Sensor for K-Series
Honda Engines

ATI Street Super Damper Crank Pulley 918477
for Acura Honda K20A K20A K20Z K24

SKUNK2 ALPHA FORGED VALVE DISH FACE/ STD COMP SET FOR HONDA/ACURA K20 K...

SKUNK2 TUNER STAGE 1 ONE CAMS
CAMSHAFTS FOR ACURA RSX TSX HONDA...

Skunk2 Racing 309-05-0090 Pro Series Hard Anodized 74mm Throttle Body for Acura Honda K-Series Engines ( port machine throttlebody to intake manifold )

I put the Hondata K Pro recording
Files
-10 min idling
-Cruising down the street
-And one with pull

Thank you in advance

[JaviBori1]

Sorry in advance if I post it in the wrong spot but I need help with my swap.
After rebuilding the top end of the engine and put it all back together and taking it for a ride down the street back-and-forth I keep getting a knock sensor code. I have not tuned the car yet I just want to make sure everything is 100% good before I take it to the tuner
And another lil problem is battery light starts dimming light to bright lil by lil 🤷🏽‍♂️

And yes this is my first Kswap ever 😑

96-00 Honda Civic Mandrel Exhaust by TruBendz - 3" Aluminized Steel Tubing

K Series K20 K24 Megaphone Pipe Header Exhaust 3" 4-1 Tri-Y EK EG DC2 Civic V Band Down Pipe

SKUNK2 TUNER STAGE 1 ONE CAMS CAMSHAFTS FOR ACURA RSX TSX HONDA CIVIC SI K20 K24

Skunk2 Pro Series Intake Manifold for Honda EP3/DC5 K20A K20A2 K20Z1 K24A1 Swap

Skunk2 Alpha Series Valve Springs and Ti Retainers K20 K20A2 K20Z1 K20A3 K24A4

ACUITY Throttle Position Sensor TPS HALL EFFECT FOR R$X-S EP3 CIVIC SI K20 1879

K-Tuned 4 BAR MAP Sensor for K-Series
Honda Engines

ATI Street Super Damper Crank Pulley 918477
for Acura Honda K20A K20A K20Z K24

SKUNK2 ALPHA FORGED VALVE DISH FACE/ STD COMP SET FOR HONDA/ACURA K20 K...

SKUNK2 TUNER STAGE 1 ONE CAMS
CAMSHAFTS FOR ACURA RSX TSX HONDA...

1000cc Honda / Acura K20 K24 2.0 2.4 SouthBay Fuel Injectors

Skunk2 Racing 309-05-0090 Pro Series Hard Anodized 74mm Throttle Body for Acura Honda K-Series Engines ( port machine throttlebody to intake manifold )

I put the Hondata K Pro recording
Files
-10 min idling
-Cruising down the street
-And one with pull

Thank you in advance

[CalibratEd]

I don't see a knock sensor code in the logs.

In regards to the battery light, double check connections to the alternator are ok. Check the belt as well. If all this is fine then your alternator might be going bad. I see that the voltage is dropping in the log.

-Ed

[JaviBori1]

The knock sensor code is on the ( cruising..kdl files ) about 40sec in
and ok I will get a alternator coming.

[CalibratEd]

The knock sensor code is on the ( cruising..kdl files ) about 40sec in
and ok I will get a alternator coming.

I will take a look at it again when I get a chance.

-Ed

[JaviBori1]

Ok TY

[CalibratEd]

I see the code now. Check if the connector to the knock sensor is loose. Check the wiring as well.

-Ed

[JaviBori1]

yes i put a new PLM kseries knock sensor
with a new pigtail
and we check continuity from plug to pcm

[CalibratEd]

Any reason you didn’t go oem?

-Ed

[JaviBori1]

The oem one did not work either

[CalibratEd]

You might and electrical issue or ecu issue.

-Ed

[JaviBori1]

Ok i will see what I could find out

[JaviBori1]

Is it normal for the knock sensor voltage to drop to 0 while driving?