LAUNCH RETARD ISSUE

[Velocityraptor26]

I have a problem and it is that my k24a2 turbo does not want to delay the time during the launch, I have been with the same tune for 3 years and I never had delay problems, I changed coils, I have verified, I changed the ecu and the same problem continues, I disabled the launch and I put the limiter at 5,500RPM and in the log you can see rev limit on and off several times, but when I activate the launch I do not see that it activates the rev limit function starts and delays -10 deg and then goes up to 22 deg and what it does is cause the RPM to oscillate. attached log Thank you

[Velocityraptor26]

always on

6500
6600
-25 deg
700 unit

[Spunkster]

Post the calibration used to make the datalog.