another k24 ep3

[si death]

Hello

Decided over the pandemic to dive more into cars and a k24 swap later, here I am. I still feel very noob and tuning is even more daunting , am looking for anyone/someone to help me get it tuned to just be fun to drive. I guess here is the obligatory list of mods

jdm k24a
RRC intake manifold
stock k20a3 throttle body
AEM V2 intake
DC5R/ITR header 4-2-1 with cat
RSX type S mid pipe
stock ep3 muffler
Type S oil pump
50 VTC
RDX 410 injectors

Ive tried to find the useful youtube videos to just help me get it going. I started with the stock tsx tune and then did the following for now (dont know what Im doing)

select 410 injectors and set dead times
closed loop
multiplexer selected
, I think thats about it, let me know what else I should enable/disable or who to talk to (CalibratED??) I cant seem to pm

much thanks!!!!

[MondeCruel]

Turn it on and see how it runs, you will have to add fuel to get good afrs ( you can use shift+f5 to get estimated fuel changes ) and check that you dont get knock counts, also your engine coolant not overheating, things like that to be safe.

[CalibratEd]

Hello

Decided over the pandemic to dive more into cars and a k24 swap later, here I am. I still feel very noob and tuning is even more daunting , am looking for anyone/someone to help me get it tuned to just be fun to drive. I guess here is the obligatory list of mods

jdm k24a
RRC intake manifold
stock k20a3 throttle body
AEM V2 intake
DC5R/ITR header 4-2-1 with cat
RSX type S mid pipe
stock ep3 muffler
Type S oil pump
50 VTC
RDX 410 injectors

Ive tried to find the useful youtube videos to just help me get it going. I started with the stock tsx tune and then did the following for now (dont know what Im doing)

select 410 injectors and set dead times
closed loop
multiplexer selected
, I think thats about it, let me know what else I should enable/disable or who to talk to (CalibratED??) I cant seem to pm

much thanks!!!!

Si,
welcome to the forum. You can not pm due to the fact that you don’t have enough posts to enable that function. Post the calibration file you are running and a datalog. I can take a look at it when I get a chance. Are you looking for a full Etune or a tune to make the car drivable?

-Ed

[si death]

Hello

Decided over the pandemic to dive more into cars and a k24 swap later, here I am. I still feel very noob and tuning is even more daunting , am looking for anyone/someone to help me get it tuned to just be fun to drive. I guess here is the obligatory list of mods

jdm k24a
RRC intake manifold
stock k20a3 throttle body
AEM V2 intake
DC5R/ITR header 4-2-1 with cat
RSX type S mid pipe
stock ep3 muffler
Type S oil pump
50 VTC
RDX 410 injectors

Ive tried to find the useful youtube videos to just help me get it going. I started with the stock tsx tune and then did the following for now (dont know what Im doing)

select 410 injectors and set dead times
closed loop
multiplexer selected
, I think thats about it, let me know what else I should enable/disable or who to talk to (CalibratED??) I cant seem to pm

much thanks!!!!

Si,
welcome to the forum. You can not pm due to the fact that you don’t have enough posts to enable that function. Post the calibration file you are running and a datalog. I can take a look at it when I get a chance. Are you looking for a full Etune or a tune to make the car drivable?

-Ed

Ill try to upload the calibration file and a datalog this weekend. I am wanting full tune, but not wanting max power, just wanting rliable daily with some redline fun

[CalibratEd]

Post your calibration and datalog when you can. I can make broad changes to make sure it's safe. When you're ready for a full tune all tables will be tuned to get you the most power for your modifications.

-Ed