Skunk2 CAI and FlashPro

[EFICU]

It doesn't look too bad at all. I made a couple WOT fuel changes and some ignition for the knock. Take this one for a spin when you can.

Joshua97.HondataTest2.fpcal

[Joshua97]

Hey here's a data log from the previous calibration you uploaded. Thank you!

datalog0028.fpdl

[EFICU]

Made some small adjustments for knock in this one. Take it for a spin when you can.

Joshua97.HondataTest3.fpcal

[Joshua97]

Here's a data log from the most previous calibration you uploaded. Thanks!

datalog0029.fpdl

[EFICU]

Not too bad, still a few knock so I made some changes. It was mostly on your 6th gear cruising. So we'll see how it looks in this one.

Joshua97.HondataTest4.fpcal

[ninoromo]

Hello, I also have a 3.5" intake (k-tuned) and live at about 4000 feet above sea level. would one of the tunes aforementioned be appropriate/ safe? Or would I be better off using the sri/.../ catback basetune? I am all stock besides intake and flashpro. Thanks!

[EFICU]

Hello, I also have a 3.5" intake (k-tuned) and live at about 4000 feet above sea level. would one of the tunes aforementioned be appropriate/ safe? Or would I be better off using the sri/.../ catback basetune? I am all stock besides intake and flashpro. Thanks!

What year is your car?

[Joshua97]

Hey sorry for the late reply. Had a shit show of a week but I was able to go out and collect a datalog for you with the most recent calibration you sent. Thanks!

datalog0030.fpdl

[EFICU]

No problem. That one looked pretty good. No knock which is good, so make another one when you can and we'll see if it stays knock free.

[Joshua97]

Hey here's a datalog from the same calibration. Everything feels good especially at WOT.

datalog0031.fpdl

[EFICU]

Yep it looks really good. We had a couple knock on the fourth gear and fifth gear pull. So I made a small adjustments there. All the fuel stuff looks great. Take this one for a spin when you can, no rush!

Joshua97.HondataTest5.fpcal

[Joshua97]

Here's a datalog for you from the recent calibration you sent me! Thank you!

datalog0032.fpdl

[EFICU]

Made some small adjustments for the knock again. See how this one looks.

Joshua97.HondataTest6.fpcal

[Joshua97]

Cool, here's a datalog from that calibration. Thank you!

datalog0033.fpdl

[Joshua97]

I recently ordered a Skunk2 Megapower RR 76mm cat back exhaust. Should be here in a couple weeks. Any chance we can tweak the current calibration to get the most performance out of it or would we need to restart with a fresh calibration?