Kpro V4 on “PPL” ecu

[MT-Garage]

58B7F34E-F5C5-4DA4-82E9-3A96D480ABC0.jpeg

Hello,

I recently got a hondata Kpro V4 with a PPL ecu from an authorized dealer.

I am having issues on tuning my k24 with the cam degree? Everytime we just rev the car it shoots all the way to 26 and there is a P0010 VTC code.

I tried another Kpro V4 “PRB” with the same base map and everythingworks out perfectly with no issues

Thanks!

[Hondata]

What wiring is in use? 02-04 or 05-06? Has either ECU been prepared for 05-06?

[MT-Garage]

02-04 DC5 harness on an EG chassy

[Spunkster]

What is the serial number that is on the K-Pro board inside the ECU?

[MT-Garage]

82F13530-4DE4-47DE-99F5-1F2AD6D910B8.jpeg

[Spunkster]

It looks like this was sold as an install kit to Tri-State Performance LLC. I would recommend that you have them test this for you to see if it is working correctly. If the ECU is damaged you should be able to supply them a working ECU to have the K-Pro installed into.

[MT-Garage]

Okay thanks, will just bring it back.

I bought the whole ECU kpro’d already from them.