Basemap Suggestions or File Needed

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

B0BSK1
Posts: 37
Joined: Wed Apr 20, 2022 5:05 am

Re: Basemap Suggestions or File Needed

Post by B0BSK1 »

EFICU wrote: Fri Apr 22, 2022 5:00 pm
B0BSK1 wrote: Fri Apr 22, 2022 2:25 pm Cheers for putting I the effort on this map my car has similar spec and has came alive with this map. Looking to put some rdx injectors next week so would it be all right to hijack the post for a little fine tuning after??
As Ivan said, go ahead and make your own thread when you can. While you're here, you mention wanting to go with RDXs, I will only tune OEM RDXs. I don't tune aftermarket RDX injectors from eBay and Amazon, or any other aftermarket brand RDX. Fake RDX injectors cause a lot of issues in the short term, for long term I imagine the issues will get worse. But we can discuss that in your thread when you make it.
Nice one thanks .yeah iv herd all the horror stories reference the cheap copies and made sure I went to a reputable supplier he literally took them off his own car for me .shout out to the guys at onamission.

Will start Mt own thread next week .

Thanks again
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: Basemap Suggestions or File Needed

Post by EFICU »

B0BSK1 wrote: Sat Apr 23, 2022 9:46 am
Nice one thanks .yeah iv herd all the horror stories reference the cheap copies and made sure I went to a reputable supplier he literally took them off his own car for me .shout out to the guys at onamission.

Will start Mt own thread next week .

Thanks again
Sounds good, we'll talk then. I think I have a grasp on determining fake RDXs now, so if anything looks funky we will discuss it. Also, make sure you let me know before installing the RDXs, whichever file you're driving on needs to have the RDX injector data added prior to the first start and drive.
B0BSK1
Posts: 37
Joined: Wed Apr 20, 2022 5:05 am

Re: Basemap Suggestions or File Needed

Post by B0BSK1 »

Smashing really appreciate your help look forward to dialling in the old girl. Yes I saw they need a seprate setting I'll speak soon and start own thread .save the original poster . Thanks again bob
IvanJonn
Posts: 53
Joined: Tue Feb 01, 2022 2:48 pm

Re: Basemap Suggestions or File Needed

Post by IvanJonn »

Hey man, emailed you awhile back, just wondering if you got it?
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: Basemap Suggestions or File Needed

Post by EFICU »

Hi Ivan. Yeah I glanced at it the other day, I'm trying to get back to all the emails from the last few days, but there are so many unfortunately. We'll get you sorted though and out of that calibration you bought from the other guy.
IvanJonn
Posts: 53
Joined: Tue Feb 01, 2022 2:48 pm

Re: Basemap Suggestions or File Needed

Post by IvanJonn »

Of course! No worries at all, sorry to nudge but good to know. I shall now wait patiently. Thank you!
Rustbucket710
Posts: 2
Joined: Thu May 25, 2023 6:51 pm

Re: Basemap Suggestions or File Needed

Post by Rustbucket710 »

Would love any kind of help with my base map if possible. Have unknown CAI, full race exhaust, skunk 2 alpha header. Would love to pick someone’s brain about this! Thanks!
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: Basemap Suggestions or File Needed

Post by CalibratEd »

Rustbucket710 wrote: Thu May 25, 2023 6:56 pm Would love any kind of help with my base map if possible. Have unknown CAI, full race exhaust, skunk 2 alpha header. Would love to pick someone’s brain about this! Thanks!
Welcome to the forum Rust,

Create your own thread and I can help out or pm me with any questions you might have.

-Ed
Instagram: calibrated.tuning
Rustbucket710
Posts: 2
Joined: Thu May 25, 2023 6:51 pm

Re: Basemap Suggestions or File Needed

Post by Rustbucket710 »

Hey there! Sorry I never received a notification about your reply! Still having the same issue unfortunately. If you don’t mind feel to message me. I was trying to send you a message but can’t figure out how. Still new to this…. Lol But I appreciate your time!
Post Reply