S300 answers?

[clockstick]

Hello, I have a 1999 Honda Civic Hatch DX
I am wondering if the hondata s300 still allows for full normal operation of the stock ecu. and I simply tune the stock maps that are already in the stock ECU... or if I end up tuning in ranges outside the stock ecu like boost.
Also does it support dirrectly a Wide Band oxygen sensor, or do I need a controller unit for it.
will the unit support many different types of injectors? High/low impedance?
I want to keep my stock like operation but simply add a tunable boost range to my car?
Any information you can give me would be great.

A little back ground I am not a newb. I have a tuned 375RWHP mazda RX-7 Turbo running a Haltech I installed and tuned myself. I did all the work myself. Now I just want my daily driver to have some passing power on the high-way. Not looking to blow away all cars I already have a car to do that. I just want some more power on the highway and a litle more fun in the streets.
Thanks

[Spunkster]

I would highly recommend reading http://www.hondata.com/aboutus.html

You will have to convert to one of the compatible OBD1 ecus form the list at http://www.hondata.com/ecus.html, then you can use the s100 , s200 or s300. You should download the s300 software (Smanager) to see how everything works.

Any wideband you use will still need a controller. We recommend the PLX Devices wideband.

[clockstick]

I read those both already, but the brochure does not include the s300 from what i could read it involved the s200.
I did answer a few questions I had
do those base maps come included with the s300 or only with the s200 and rom editor?
Thanks again.

[Spunkster]

Yes there are base maps built in to the software. Download the software and take a look. The s300 is the same as the s200, only it is cheaper and includes all options , is real-time programmable and fits in side the ecu.

There is a complete comparison of the systems at http://www.hondata.com/sproducts.html