2012 Si base map tune

2012+ US/Canadian Civic Si / 2013+ ILX
SDblaze66
Posts: 10
Joined: Mon Oct 25, 2021 7:42 pm

Re: 2012 Si base map tune

Post by SDblaze66 »

I had time to do a run this morning. Check it out when you get a chance.
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Si base map tune

Post by EFICU »

Yeah it looks really good. So I've gone in and blended out all the tables, so take this one for a spin and see what you think. Vtec looks happiest at 4300, so we'll see how that works in this one and how it feels in the car. Shoot for twenty minutes on the datalog with at least one third gear pull, but feel free to drive it however you want. Feel free to have some fun with it if you want.
SDblaze66.SD.Rev06 (Blended)(Vtec4300).fpcal
You do not have the required permissions to view the files attached to this post.
SDblaze66
Posts: 10
Joined: Mon Oct 25, 2021 7:42 pm

Re: 2012 Si base map tune

Post by SDblaze66 »

Here is a 20 minute run blended. Check it when you have a chance.
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Si base map tune

Post by EFICU »

It looks really good. I made a couple small WOT fuel adjustments, and some ignition adjustments for the knock. Take this one for a spin when you can. No rush, it's 99% there.
SDblaze66.SD.Rev07 (Blended)(Vtec4300).fpcal
You do not have the required permissions to view the files attached to this post.
Post Reply