2013 Civic Si Basemap help

2012+ US/Canadian Civic Si / 2013+ ILX
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Happy Monday! Here's a log with revision 11, thanks!
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Still had a few random knock in the normal areas. I made a fee more changes, we'll see how the next one looks.
TokyoBadBoy.SD.Rev12 (Blended)(Vtec4300).fpcal
You do not have the required permissions to view the files attached to this post.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Heyo, it's a beautiful day! took 12 for a rip, lmk!
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

It looks great again, and knock free. Go ahead and datalog another drive later this week sometime and if it looks just as good I think we're there. I did make a couple fuel changes for WOT, so load this one and we'll see how the next one looks. You will want to look into getting RDX injectors or something in the near future. You're running in the 90% duty cycle range which is time to start thinking about adding them.
TokyoBadBoy.SD.Rev13 (Blended)(Vtec4300).fpcal
You do not have the required permissions to view the files attached to this post.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Hey sorry been MIA for a few days, I'm putting on my stock exhaust back on tuesday.. Once my exhaust broke in the 3in is just too loud. Should I run this same tune and put up a datalog when I have it all on? Keeping the exhaust just replacing the catback.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

No problem. Yeah just make a datalog with that calibration and we'll make adjustments as needed. It will most likely richen up a little bit, but that's easy to take care of.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Hey! Here'sa datalog w rev13 and my stock exhaust back on. LMK! Thank you!
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Yeah it definitely richened up the WOT stuff. I made a few adjustments for it, take this one for a spin when you can.
TokyoBadBoy.SD.Rev14 (Blended)(Vtec4300).fpcal
You do not have the required permissions to view the files attached to this post.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Hello! Another one 8), feels good!
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

It looks really good. I made a couple small tweaks, we should be there on this one. Take it for a spin when you can.
TokyoBadBoy.SD.Rev15 (Blended)(Vtec4300).fpcal
You do not have the required permissions to view the files attached to this post.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

anotha one !
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Sorry for the delay. Overall it looked good, had a random knock on a fourth gear pull so I made an adjustment there. Take this one for a spin when you go somewhere.
TokyoBadBoy.SD.Rev16 (Blended)(Vtec4300).fpcal
You do not have the required permissions to view the files attached to this post.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Heyo, here's the datalog !
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

It looks really good. Go ahead and make another datalog later this week, we might be there.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Hey! Sorry about the radio silence, been focusing on my finals. But here's a datalog! Also, might be picking up some injectors shortly, will we have to adjust for that? lmk!! Thanks man!
You do not have the required permissions to view the files attached to this post.
Post Reply