basemap plzzz

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
fb6sebi
Posts: 8
Joined: Sat Mar 05, 2022 10:43 pm

basemap plzzz

Post by fb6sebi »

i have dw 265 fuel pump, rdx 410cc injectors, invidia n1 3in catback, ktuned 3.5 sri behind the headlight (might run a vstack through the headlight in the near future), rbc ported for zdx, zdx throttle body, i really need a basemap because hondata doesnt provide one for everything that i have until i can afford to get a dyno if anyone can help thanks
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: basemap plzzz

Post by EFICU »

What year is your 9th gen? Either way, there will be some tuning required to get it dialed for you and your setup. But let me know what year it is and we can go from there.
fb6sebi
Posts: 8
Joined: Sat Mar 05, 2022 10:43 pm

Re: basemap plzzz

Post by fb6sebi »

2012 si
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: basemap plzzz

Post by EFICU »

Okay. Unfortunately I don't have any basemaps for that, we would have to go in and do a complete tune on it for you. It would take around 10-12 revisions to get it dialed. We would have to go in and tune each cam angle one by one and blend it all out it why it takes so many revisions.
fb6sebi
Posts: 8
Joined: Sat Mar 05, 2022 10:43 pm

Re: basemap plzzz

Post by fb6sebi »

anything just to get me back on my feet please
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: basemap plzzz

Post by EFICU »

Okay. I’ll get one put together and post it in the morning.
fb6sebi
Posts: 8
Joined: Sat Mar 05, 2022 10:43 pm

Re: basemap plzzz

Post by fb6sebi »

thank you so much
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: basemap plzzz

Post by EFICU »

Okay, for datalogs we need them to be in the twenty minute range with as much stop and go driving as possible. On the drive, we need one wide open throttle (WOT) pull in third gear from 2500-7500. Keep the driving normal and calm for this first datalog so we can gather some data. Then we'll go from there and see how it goes. This one will be the 0* cam angle with vtec at 4500. The 0* cam angle is the least powerful, so don't get discouraged if it doesn't feel strong.
fb6sebi.SD.Rev01 (0Cam)(Vtec4500).fpcal
You do not have the required permissions to view the files attached to this post.
fb6sebi
Posts: 8
Joined: Sat Mar 05, 2022 10:43 pm

Re: basemap plzzz

Post by fb6sebi »

okay ill see if i can make it tomorrow my coupler broke for my intake lol tryna see where i can get one today since its sunday
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: basemap plzzz

Post by EFICU »

It's always something with these cars, haha. Just keep me in the loop.
fb6sebi
Posts: 8
Joined: Sat Mar 05, 2022 10:43 pm

Re: basemap plzzz

Post by fb6sebi »

will do thanks
fb6sebi
Posts: 8
Joined: Sat Mar 05, 2022 10:43 pm

Re: basemap plzzz

Post by fb6sebi »

so its been a week and still couldnt find anywhere that sells 3in to 3.5 couplers so i had to order one and spend another week without the car should get here friday ima let you know for the datalogs
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: basemap plzzz

Post by EFICU »

Run and idle test using this calibration.
fb6sebiHondataBasemap (Idle Test).fpcal
You do not have the required permissions to view the files attached to this post.
Post Reply