Help with getting the right calibration
Re: Help with getting the right calibration
That's a pretty short heads up, haha. Here is the first one for you. For the datalogs, shoot for twenty minutes in length with stop and go driving. On the drive, throw in one wide open throttle (WOT) pull in third gear from 2500-8600.
You do not have the required permissions to view the files attached to this post.
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
My bad, found out last minute I had some time to do it! Adding coolant in my car now and gonna flash my car before I bleed the coolant and then I’ll get the data log! I appreciate the help tremendously!!
Re: Help with getting the right calibration
Sounds good. We'll see how it looks.
You're welcome.
You're welcome.
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
Sorry for the late response! Needed someone to come over to hook my battery up so I could flash my car so it wouldn't die and then needed to re-bleed my coolant because I was starting to over-heat a little when I was driving! car seems to be driving great and did this log later in the night! hope it's what you need! there wasn't a lot of traffic out there tonight.
You do not have the required permissions to view the files attached to this post.
Re: Help with getting the right calibration
No problem, I was wondering about an hour ago that I hadn't heard from someone I should have by now. Haha. So we almost nailed it on the first try. I made some small fuel adjustments, other than that it looks killer. Take this one for a spin when you can, it's pretty much 99% there already, so feel free to have some fun with it. Just be sure to shoot for twenty minutes, and the third gear WOT pull like you did. But feel free to have some fun with it, it's plenty safe.
You do not have the required permissions to view the files attached to this post.
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
Awesome! I’ll flash that tomorrow when I get to work and see how it is! Again, thank you so much for the help and the time to do this! Was completely shocked driving home tonight… that header might be coming sooner than I thought lol
Re: Help with getting the right calibration
Sounds good to me. You're welcome!
Yeah, once you get the header you'll be blown away once we tune it. It's pretty impressive what simple mods and a race header can do on these cars.
Yeah, once you get the header you'll be blown away once we tune it. It's pretty impressive what simple mods and a race header can do on these cars.
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
is there any way to trim a datalog? I forgot to turn it off after 20 minutes and the file is too large to attach it...
Re: Help with getting the right calibration
Select the position in the datalog, right click, then either set new start or set new end.
Hondata
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
datalog with the new tune!
You do not have the required permissions to view the files attached to this post.
Re: Help with getting the right calibration
The fuel stuff looks really good. We had a few knock with the more spirited driving, so I made some adjustments for that. Take this one for a spin when you can, same datalog and driving style. We'll see how it looks.
You do not have the required permissions to view the files attached to this post.
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
datalog from the new tune! got two, the second one is just a little pull
You do not have the required permissions to view the files attached to this post.
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
The 4.5 is the pull one!
Re: Help with getting the right calibration
It all looked great, one little knock on a third gear pull. I pulled a little timing out right there, take this one for a spin when you can. I think we might be there.
You do not have the required permissions to view the files attached to this post.
-
Tigerfrati
- Posts: 23
- Joined: Sat Feb 26, 2022 11:45 am
Re: Help with getting the right calibration
didnt get much of a drive in but tried to get the 3rd gear pull and drive around in different gears for a little.
You do not have the required permissions to view the files attached to this post.