FlashProManager 3.9.0

[Hondata]

V3.9.0 (3 Mar 2022)

• [FK2] Added rev limiter modifications, high pressure pump tables.
• [2006-2011 Si] Fixed active tuning maximum load not going above 100 kPa
• [Multiple vehicles] Fixed full throttle shift rpm changing to 0 rpm.
• Add setting flag to enable 4k monitor support.

Download here

Additionally the FK2/FK8 high pressure fuel pump modifications have been split into two parts - the changes need for the different fuel pump hardware (which is fixed) and the PID / feed forward control tables (which the user can change). Normally you would select both the modification files.

Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.

[Bain]

Hi,

Is the below only for the hondata fuel pump, or does the XDI pump now also work on the FK2?

"high pressure pump tables"

[Hondata]

Let me ask XDI.

[Bain]

Let me ask XDI.

Thank you so much for the assistance, as the XDI pump works on the FK8 I thought the change had to come from Hondata for it to work, not XDI.
Or is it a half half thing? Again thanks for everything you okes do to assist us.

[Hondata]

Yes, it has to be a joint effort to make tuning changes. XDI is good to work with.

Do you have the XDI pump in the vehicle now? If so I can provide some modifications files to get it running.

[lightarmy10]

Yes, it has to be a joint effort to make tuning changes. XDI is good to work with.

Do you have the XDI pump in the vehicle now? If so I can provide some modifications files to get it running.

Hi , I want to ask that now i have Hondata flashpro for 2018 10th Gen Civic Hatchback CVT , i'm planning to sell my car and buy 11th Gen Civic CVT . just curious, can my hondata flashpro still be installed on gen 11?

[Bain]

Yes, it has to be a joint effort to make tuning changes. XDI is good to work with.

Do you have the XDI pump in the vehicle now? If so I can provide some modifications files to get it running.

Hi, I have heard good things about the XDI pump, some of my friends wth FK8's say it really works great.
I have not bought one as I was not sure when and if it will work on the FK2, by your comment I take that it will now also work on the FK2?

[Bain]

Yes, it has to be a joint effort to make tuning changes. XDI is good to work with.

Do you have the XDI pump in the vehicle now? If so I can provide some modifications files to get it running.

I will be looking at getting one then, please can you suppky em with the files.

[Hondata]

Hi , I want to ask that now i have Hondata flashpro for 2018 10th Gen Civic Hatchback CVT , i'm planning to sell my car and buy 11th Gen Civic CVT . just curious, can my hondata flashpro still be installed on gen 11?

Yes.

[Hondata]

I have not bought one as I was not sure when and if it will work on the FK2, by your comment I take that it will now also work on the FK2?

That is a question for XDI.

[lightarmy10]

Hi , I want to ask that now i have Hondata flashpro for 2018 10th Gen Civic Hatchback CVT , i'm planning to sell my car and buy 11th Gen Civic CVT . just curious, can my hondata flashpro still be installed on gen 11?

Yes.

No need to jailbreak the ECU , just do the same step by step reflashing like the 10 th Gen if i reflash choose the basemap file to 11th Gen right?

[Hondata]

Yes, unlock from the old car, lock to the new one, upload a calibration.