I think my A/C has been disabled completely!

see2k · Post by **see2k** » Mon Jan 13, 2003 6:08 pm

Hi,

back in the day, before I had the Hondata, my A/C used to work with OBD II ecu's and the piggy backs. But now, my A/C won't work anymore.

I just idle, and nothing happens. By any chance is my A/C not working because of my P28 ECU/Hondata 4b?

When I check the romeditor, in gray, it says to disable ac at 5500 rpm
or 50% throttle and turn it back on at 6% or below throttle.. It is not user changeable.. so I am wondering if this is a bug or not?

I am going to put the OBD II ecu back on and see what happens tonight.. more on this tonight!

Jaker · Post by **Jaker** » Fri Jan 17, 2003 7:06 pm

It could be that your OBD conversion adapter is not correctly configured to retain your A/C functionality.

see2k · Post by **see2k** » Mon Jan 27, 2003 11:08 am

Jaker wrote:It could be that your OBD conversion adapter is not correctly configured to retain your A/C functionality.

yes you were correct. i found a unconnected ODB connection, and put in back in its right place by looking at another wiring harness.

it works now..

see2k · Post by **see2k** » Mon Jan 27, 2003 11:08 am

Jaker wrote:It could be that your OBD conversion adapter is not correctly configured to retain your A/C functionality.

yes you were correct. i found a unconnected ODB connection, and put in back in its right place by looking at another wiring harness.

it works now..