2014 civic Si Tune help

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
opolanco15
Posts: 2
Joined: Thu Feb 17, 2022 12:00 pm

2014 civic Si Tune help

Post by opolanco15 »

Been running the basemap for a while with few adjustments, To be honest I thought I could learn it on my own and its been difficult.

currently running a K/N typhoon Intake and Straight piped from the Cat back.
Planning to get a exhaust soon as well.
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2014 civic Si Tune help

Post by EFICU »

What are your main concerns? Overall it isn't too bad, and most of the knock is from cruising on the highway which is common but easy to remove.

What octane fuel are you running?

How soon do you plan to add the exhaust?
opolanco15
Posts: 2
Joined: Thu Feb 17, 2022 12:00 pm

Re: 2014 civic Si Tune help

Post by opolanco15 »

running 93oct Fuel, and the exhaust most likely by summer
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2014 civic Si Tune help

Post by EFICU »

Okay, since you plan to add the DP in the next months, I can help you tune it the quick way and then once you add the exhaust we can go in and tune it the long way. It's time consuming on your end to make so many datalogs, so I hate to have you guys go through the process more than once. But we can start you on my stuff, then clean up the tune for your car so it's safe and you can have fun, then go in and do a complete tune once the DP is in.

The shorter route will take maybe 4-5 revisions, to go the long route will be maybe 10-12. I compared the areas of knock in your datalog to my file, and there is less timing in my calibration so the knock should go away from the start.

Let me know what you think, and also let me know if you had concerns about tuning your car and why you got discouraged.
Post Reply