2014 FB6 Stock - Basemap from Hondata good enough?

2012+ US/Canadian Civic Si / 2013+ ILX
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2014 FB6 Stock - Basemap from Hondata good enough?

Post by EFICU »

Hi Techi,

Sorry I saw your post and forgot to open everything. You might see if you can get a hold of a scan tool that will read airbag codes and what not then. Maybe there is an issue with something in the SRS system causing the light to come on.

Yeah almost everything on here gets a lot of downloads and views I guess. All my files to you guys have your name on them and in the calibration file, so whoever else uses them it's on them. I have had quite a few people contact me saying they tried X file and it worked well for them. It's sort of a double edge sword, I like guys being able to find calibrations to help them, but I don't like the possibility of them using one not designed for them. Sometimes I'll turn off the knock retard or something to tune the ignition, then someone uses that one not reading the post and then they don't have a knock retard strategy on there car. Nothing I can do I guess.

So overall they looked good. One had a three knock, and the other didn't have any. So take this one for a drive when you can and we will see how it looks. All three knock happened in the same 600rpm range, so it's a very specific area where it is happening.
Techi.SD.Rev15 (Blended)(Vtec4600).fpcal
You do not have the required permissions to view the files attached to this post.
Techi
Posts: 33
Joined: Tue Dec 28, 2021 2:56 pm

Re: 2014 FB6 Stock - Basemap from Hondata good enough?

Post by Techi »

Hey EFICU,

No worries man, thanks for your support, here you go my last drive a little bit of City and highway,

Let me know how it looks, light still there so will see what happened,
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2014 FB6 Stock - Basemap from Hondata good enough?

Post by EFICU »

Yeah then it sounds like there might be fault with the actual SRS system then, so you might want to get it looked at or find a scan tool that can read an SRS code that is present.

That datalog looked good. No knock again which is good. I made a slight adjustment in the background for the fuel trims. So take this one for a spin when you can. If it stays knock free we might be there...
Techi.SD.Rev16 (Blended)(Vtec4600).fpcal
You do not have the required permissions to view the files attached to this post.
Techi
Posts: 33
Joined: Tue Dec 28, 2021 2:56 pm

Re: 2014 FB6 Stock - Basemap from Hondata good enough?

Post by Techi »

Hey Eficu,

Let me know how this one looks, hope you had a good weekend,
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2014 FB6 Stock - Basemap from Hondata good enough?

Post by EFICU »

It looks good Techi. No knock again. If you want, go ahead and make one more towards the end of the week to see if it's knock free, if so, I think we're there.
Techi
Posts: 33
Joined: Tue Dec 28, 2021 2:56 pm

Re: 2014 FB6 Stock - Basemap from Hondata good enough?

Post by Techi »

Perfect, will do!!!

Thanks for all your support man, I was wondering if there's something you collect or if there's a way I could express my gratitude,

Thank you,
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2014 FB6 Stock - Basemap from Hondata good enough?

Post by EFICU »

Hi Techi,

No problem, you're welcome! My main focus is just helping you guysthat need it. If you feel like you want to send something of any sort, that is totally up to you. In your calibrations, my email is under the "calibrations" tab with all your vehicle info. You can contact me there if you want to. Other than that though, as long as you guys are happy that's my main focus.

Talk soon.
Post Reply