Looking for K24A1 Stock Calibration or maybe JRSC k24a1?

[blacklisted_crv]

Hello all,

Doing something a little strange just for fun but need a map just to get it going. I have a k24a1 2002 CRV manual that i am putting a JRSC on. I have ID 1000CC injectors and an 8 psi pulley. I have a built block and z1 head combo going together for this summer but i just want to put the JRSC on basically for fun.

I know crome very well but its been years, i also knew s300 pretty well but not like crazy good. I have wideband and boost gauge but i need something just to get it started so I can get it running and make sure my belt and tensioners work properly before I have it tuned. Would also be nice to be able to drive it the 53 miles to the tuner but beggars cant be choosers. The cam timing thing scares me more than anything.

Let me know if you can help!

[CalibratEd]

I can help you out. What tune is it running on now? What Ecu are you running?

-Ed

[blacklisted_crv]

its just on the stock ecu, I have no installed the supercharger. I realized that I am dumb and can just use the k20a3 as a baseline.

its the stock PPA ecu for 02-04 crv manual BUT i have a v3 Kpro PND

[CalibratEd]

I would start with a stock TSX tune as its closer to your engine. Not much work will be needed as you plan to take it to a tuner. I can help with the revisions once you have installed the supercharger.

-Ed