2010 FN2 w/Hybrid Racing CAI basemap

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

ghoulboii
Posts: 20
Joined: Mon Nov 22, 2021 1:55 am

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by ghoulboii »

Hope this'll do, noticed more knock this time around when checking the datalog. What could have changed since the last one?
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by EFICU »

When is the last time you got gas?
ghoulboii
Posts: 20
Joined: Mon Nov 22, 2021 1:55 am

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by ghoulboii »

2 days ago
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by EFICU »

I would have to think that has something to do with it. Perhaps lower than advertised octane, or just poor gas in general. How fast do you go through a tank? I would recommend getting through this tank, then filling up again, then reinspect with a new datalog at that point. If it shows knock on a new tank of gas, then we should make some adjustments based on the data. For that much knock to show up out of the blue, it usually happens after filling up with new gas and it not being the right octane of poor quality. If you want, I can make adjustments based on what we see here, but I would recommend seeing how it looks with new fuel in the tank.

Let me know, it's totally up to you.
ghoulboii
Posts: 20
Joined: Mon Nov 22, 2021 1:55 am

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by ghoulboii »

Probably won't run out until early next week unless I go for some drives on the weekend. Just odd because it's BP 98 so it being lower quality is fairly surprising.

When I fill it back up I'll go to my regular place and get a datalog to see what's going on.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by EFICU »

I see. Yeah, it's just odd that we had that much knock pop up out of the blue, and you filled up with new fuel in between the two datalogs. I could be wrong, it's just best to wait and see how it looks once you fill up again. If it shows knock still with new fuel, then we will address them.

Just keep me in the loop.
ghoulboii
Posts: 20
Joined: Mon Nov 22, 2021 1:55 am

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by ghoulboii »

EFICU wrote: Sat Dec 11, 2021 8:06 pm I see. Yeah, it's just odd that we had that much knock pop up out of the blue, and you filled up with new fuel in between the two datalogs. I could be wrong, it's just best to wait and see how it looks once you fill up again. If it shows knock still with new fuel, then we will address them.

Just keep me in the loop.
Hey man, so sorry for the long time between replies been on holiday and busy at home. Did 2 separate logs, one of just driving and another with a 3rd Gear Pull. There's very slight knock at the start of the driving log but other than that it is definitely much better than the last ones.
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2010 FN2 w/Hybrid Racing CAI basemap

Post by EFICU »

No problem. Overall it looks great. I made a few adjustments for the knock, and all the fueling looks great. Test this next one out and we'll see how it looks.
Ghoulboii.SD.Rev10 (Blended)(Vtec4600).fpcal
You do not have the required permissions to view the files attached to this post.
Post Reply