rom chip.

94zchatch · Post by **94zchatch** » Mon Dec 19, 2005 8:20 pm

When I have the interface box and all the nessesary cables hooked up to the ecu do i need to use the chip supplied to me from hondata or can I use one with a base map that I already have, and also if I can use it, how do I get it to work with boost?

Post by **Spunkster** » Tue Dec 20, 2005 10:13 am

Unless your dealer put a base map on the chip, the chip supplied with the Hondata system is blank. Is the other chip you have a Hondata chip? I would recommend contacting your local dealer and get hte car on the cyno to be properly tuned as soon as you can.

94zchatch · Post by **94zchatch** » Tue Dec 20, 2005 11:03 am

I just purchased the hondata and The problem i have is that the chip that I got with the hondata is a p72 but the ecu that I have is a p75.well the chip that I already had in my p75 is not a hondata chip but I have been using it in my ecu for about a year. Its a chip that is burned with the spoon program but its not spoon. I dont want to have to buy a p72 ecu just to use my hondata I would like to use my p75 and just reburn the spoon chip If possible.

Post by **Spunkster** » Tue Dec 20, 2005 1:39 pm

you boght the HOndata to be able to fully tune it but hten say you want to be able to use some copy of a untuned program....this makes no snese.

Take the car to a Hondata dealer and get it peroprly tuned on the dyno and you will have a well running safe running car.

94zchatch · Post by **94zchatch** » Tue Dec 20, 2005 8:28 pm

The spoon chip is tuned to my car without turbo. I bought the Hondata to tune my car with the turbo. The chip I received with the Hondata was wrong. Can I use the chip that I already have with the Hondata by changing to read boost.

Can I tune my spoon chip, that was origanaly tuned for all motor, with the hondata to run boost?

Post by **Spunkster** » Wed Dec 21, 2005 10:14 am

No you can't use the "spoon" chip.