2011 Civic Si HR cai
2011 Civic Si HR cai
All I have is a Hybrid Racing cai and was looking to get help getting the right tune for it., everything else is stock on vehicle and im planning on sticking with this route for the next year or year and a half before I do any other mods under the hood.
Re: 2011 Civic Si HR cai
Is the intake already installed or are you planning on installing it soon?
Re: 2011 Civic Si HR cai
Yes I plan on installing it within the next few days but was wondering which base map to start off with once installed?
Also im new to this so not sure how it works on paying you for helping me with my tune and all so if you have the info I'm down to get this thing rollin
Also im new to this so not sure how it works on paying you for helping me with my tune and all so if you have the info I'm down to get this thing rollin
Re: 2011 Civic Si HR cai
Okay sounds good, be sure to upload this calibration before you start it with the intake. Once you get everything ready to go for the first drive, we need the datalogs to be 20-30 minutes in length with as much stop and go driving as possible. On the drive, we need one wide open throttle (WOT) pull in third gear from 2500-8600 so we can see the WOT fuel. Keep the driving normal and calm, with only the one WOT pull for now until I get the first datalog back from you. That way I can clean up any potential big chunks before you get after it. I'm not sure you have been reading any one my posts with the other guys, but I am really busy during the day for the next 10 days or so, so I am starting you guys on my basemap with everything blended out so I can get you something safe and fun quickly. Then when I get back to a normal schedule in a week or so, we may revisit some things to get you a cam angle map specified for your car specifically. So for now, the goal is to get it good and safe so you can have fun, then we will work on adjusting cam angle mapping and stuff down the road to get you the best product.
Here is the file. If you have any questions let me know. 20-30 minute datalog with stop and go driving, one WOT pull in third from 2500-8600. If you want the rev limiter set lower than 8600, it's totally up to you, just 8600 is the max we want to run for safety.
Here is the file. If you have any questions let me know. 20-30 minute datalog with stop and go driving, one WOT pull in third from 2500-8600. If you want the rev limiter set lower than 8600, it's totally up to you, just 8600 is the max we want to run for safety.
You do not have the required permissions to view the files attached to this post.
Re: 2011 Civic Si HR cai
sorry for the delay., I have finally had time to install the cai and i've downloaded the tune., I'll be running the data-log and I'll let you know as soon as I upload it for you.