Kpro 4 fuel level iput

[perlmeister11wagon]

I'd like my kpro v4 (base rsx ecu) to be able to read fuel level. Obviously, it would need to go from the sending unit in the tank to the analog input on the board. What I don't know is the proper wiring or if any resistors etc are needed. I'd appreciate a guide to do this. Thanks.

[Spunkster]

There is no specific input for this and no way display the info. You may be able to look at voltage, but that is all.

[perlmeister11wagon]

👍 appreciate the response