What basemap should I use ?

[EFICU]

It's knock free which is good. I think you're good for now. Let me know when you fill up again, and we will go back to Rev09 to reinspect for knock. For now thought, it looks like it's we're in the clear.

[kj6564]

Sounds good , I will need to fill
Up soon.

[EFICU]

Okay sounds good. When you fill up, throw Rev09 back in there, and then post the datalog so we can see. If it stays knock free on Rev09, then we know the fuel was most likely the issue. If it knocks again, then we will go back and use the newest ignition tables to remove it. But let's see how Rev09 acts with new fuel and go from there.

[kj6564]

I’m sorry I haven’t been posting , I’ve been busy with some personal stuff. I have a data log and I’m trying to download it in order to upload it but the software keeps telling me that I have to update it but I already have the 3.8. And when I try to click on flash pro , it tells me that it’s not responding. What could I do ?

[kj6564]

I got it now, hope this is well, Thank you !

[kj6564]

I forgot to say that i got gas and that datalog is rev9. Thanks!

[EFICU]

Interesting, still had a lot of knock come back. Can you do me one more favor, can you load 8.2 back in a take it for a drive? I just want to verify everything before we consider this the new normal is all. If it shows knock again with 8.2 then we will proceed from there.

[kj6564]

Sure thing , it rained today so I’m gonna check if the roads are wet, but imma see if I could take it today if the roads aren’t wet.

[EFICU]

Sounds good, we'll see what we get.

[kj6564]

Here is the datalog, Hopefull this is well. Thank you !

[EFICU]

Interesting, down to one knock on this one. I made some adjustments to 8.2, let's stick with this and see if it keeps yielding better results for us. Give this one a drive and we will see how it looks.

KJ6564.SD.Rev08.3 (Vtec4300)(Sport Pedal).fpcal

[kj6564]

Here is the datalog for today, hope this is well. Felt good, thanks!

[tallen212221]

I have a 2011 honda civic ex i have full exhaust system, off brand short arm CAI and An off brand header i was wondering what basemap i should use for this set up

[EFICU]

Here is the datalog for today, hope this is well. Felt good, thanks!

Looks good. Had one knock, but I think it was more of a fluke than a common occurrence. Go ahead and make another datalog whenever you can and we will see how it looks. If it shows another one there, we will make some adjustments for it. It looks really good though.

[EFICU]

I have a 2011 honda civic ex i have full exhaust system, off brand short arm CAI and An off brand header i was wondering what basemap i should use for this set up

I doubt any of them would be great based on your setup. You can try any of the SRI calibrations and make a datalog with it to see how it looks. Don't get too aggressive with the driving until you look at the datalog to see how the fueling looks and any knock you might have.

Also, please start your own thread. This is a current thread and don't want to get off course with it.