please help with calibration 2015 civic si

[EFICU]

Looks really good. Had two knock come back, so I adjusted that. Made one small WOT fuel adjustment and it's right on the verge of being dead on. Fingers crossed we're there on this one. We're right there.

Same datalog and driving style.

Jogosnow.Hybrid.Rev08 (Blended)(Vtec4700).fpcal

[jogoSnow]

here are a couple quick data logs. 24 is just some city driving, and 25 is a 3rd gear pull.

[jogoSnow]

i just looked at datalog 25 and saw there was no knocks so thats good, but i'll leave you to be the judge of whether or not we're there or not

[EFICU]

Success, haha. Everything looks good in both datalogs. No knock, part throttle fuel is good, and WOT fuel is right on. We are there it looks like. With that said, I still like for you guys to keep datalogging over the next few days if you can. Since you know how to look for knock in the datalogs, continue doing that each day at your leisure. If you do see some knock, post the datalog and we will take a look at it. Try to do some datalogging in your free time of like highway steady speed driving like you're on a long road trip and stuff. That way we can look at as many scenarios while we're working together. If nothing else, please post a full datalog with a third gear WOT pull on Thursday or Friday and post it, then we'll make another one over the weekend. I just like to see it's consistent over multiple days and all possible driving scenarios.

[jogoSnow]

Thanks for all the help. I probably would have ruined my engine if i did it myself. I really appreciate it. Also, should i let you know when i install the bolt-ons? Thanks again

[EFICU]

You're welcome. Nah, you'd be fine, Hondata makes it pretty straightforward. You just have to learn the basics and then you can begin working on the tune pretty easy. It's overwhelming at first when you have no idea what you're looking at, haha.

Yeah just let me know when you do bolt-ons. My email is in the "calibration" tab of the files I send you in case you can't get a hold of me on here. If you have any questions or anything in the future you can always email me too. If you want recommendations on which intake to get and stuff like that let me know too. If you already know what you want, that's fine too. We can make the changes for anything you get.

[jogoSnow]

here are a few datalogs for you to look at. i finally have everything together to go full bolt on. i will let you know when i get the parts installed. it will be a k tuned 3.5" short ram intake (behind headlight), and the skunk2 megapower something or another exhaust which is already on the car

[EFICU]

They all look pretty good. Had one knock in one of the datalogs, but nothing to be concerned about since we're going to retune it for FBO.

Let me know the day of the install so I can send you the first calibration for the intake. With the K-Tuned intake you will need a new calibration to get it started and all that. So, just let me know the night before or the day of install so I can put it together and we will get started on it.

[red_si]

hey jogosnow im looking to get a decent tune for my 2015 si with 3inch exhaust back to the stock muffler, with an injection cold air intake that goes into the bumper. anyway you could give me a hand if i send you some datalogs

[jogoSnow]

This is for EFICU. today i am planning install the k-tuned 3 5" ram intake, and the acuity battery relocation bracket. The exhaust will be done next weekend hopefully.

[jogoSnow]

To red_si. I am very new to hondata flashpro. If you make a new post asking for help someone with more experience will probably help you.

[EFICU]

Sounds good Jogo. You will need this calibration to start it.

For the first datalog, keep your driving normal and not aggressive, and do one WOT pull in third gear like you have been. Only do one WOT pull and normal calm driving until I see some data with the intake. It will still be very close, I just want to see some data before you get too aggressive with the driving.

Jogosnow.SD.Rev09 (Blended)(Vtec4700).fpcal

[Miller787b]

any more work done after this seeking a tune the basemap ive been using is starting to worry me