02 civic si tune help?

[CalibratEd]

And a p1259 code popped up

Double check your oil level and the connection to the Vtec pressure switch.

-Ed

[Bbert209]

Your right it was the oil, though it was something else but all it wants is a fresh oil change, didn't realize it was already that time for it.

[CalibratEd]

Load the new file and create a similar datalog. I am dialing in the fuel and removing timing in an area with knock.

-Ed

[Bbert209]

7min.kdl

14min.kdl

final.kdl

[CalibratEd]

Added some timing to the VTC 10 table. I want to see if we can gain a bit of power before we move to the next table. The Air fuel ratios look good. Load the file and create a similar datalog.

-Ed

[Bbert209]

7min.kdl

14min.kdl

final.kdl

[Bbert209]

Sorry for late post, works being a bastard again.

[CalibratEd]

Did some minor adjustments. I need a WOT pull before we move to the next table.

-Ed

[Bbert209]

7min.kdl

14min.kdl

final.kdl

[CalibratEd]

Fuel looks good we are moving to VTC 20. Create a normal driving datalog.

-Ed

[Bbert209]

7min.kdl

14min.kdl

final.kdl

[CalibratEd]

Cleaned up some fuel and added more timing at the top. Create a normal drive datalog with at least 2 WOT pulls in 3rd gear.

-Ed

[Bbert209]

7min.kdl

14min.kdl

final.kdl

[CalibratEd]

Moving to VTC 30 create normal driving data log with 1 WOT pull in 3rd gear.

-Ed

[Bbert209]

7min.kdl

14min.kdl

final.kdl