New to flashpro and could use some help

EFICU · Post by **EFICU** » Sat Jun 26, 2021 3:20 pm

All good. We'll get it sorted.

Notfd2 · Post by **Notfd2** » Sun Jun 27, 2021 3:03 am

Aplogies for the mixup, I was unable to find the original datalog so I remade it after work today.

EFICU · Post by **EFICU** » Sun Jun 27, 2021 9:45 am

No Problem, looks really good. I made a couple fuel changes to tighten things up. Take this one for a drive when you can. It's 99% there, I'm just nitpicking a couple small things now.

Notfd2.SD.Rev04 (Vtec4350)(CamAngles).fpcal

Notfd2 · Post by **Notfd2** » Mon Jun 28, 2021 2:25 pm

Didn't feel much different from the previous revision and everything looks ok on my end. Do you think it's ready?

EFICU · Post by **EFICU** » Mon Jun 28, 2021 3:33 pm

Yep, it's dead on now. I made one final revision with a cam angle adjustment and fuel at idle adjustment. Nothing you need to make a datalog for and nothing you would feel.

Enjoy it, if you need anything in the future let me know.

Notfd2.SD.Rev05 (Vtec4350)(Final).fpcal

Notfd2 · Post by **Notfd2** » Mon Jun 28, 2021 3:58 pm

Thanks so much for all your help!

MorsusMihi · Post by **MorsusMihi** » Sun Jul 18, 2021 7:51 am

EFICU I havent seen you in just about a year,
Are you able to DM me please,

Hondata

New to flashpro and could use some help

Re: New to flashpro and could use some help

Re: New to flashpro and could use some help

Re: New to flashpro and could use some help

Re: New to flashpro and could use some help

Re: New to flashpro and could use some help

Re: New to flashpro and could use some help

Re: New to flashpro and could use some help