so we have a S300 we now need a S250.... (my rant)

kesnut · Post by **kesnut** » Thu Jul 07, 2005 5:13 am

ok.. i have no where else to rant so i have to do it here....
SO S300, THE BEST THING that ever happened...
but i can't get it as i am JDM....
so Hondata, hear this one...

S250, U make the "Blue Box" bigger, put the S300 in it, make the data and rom cable longer and add USB to the "Blue Box". If u want u can add some velcro also...

What you think...

Kester Johnson

QUICKSILVER RACING · Post by **QUICKSILVER RACING** » Thu Nov 17, 2005 5:05 am

with a little persuasion I made it work and fit. Use your imagination. HTH

kesnut · Post by **kesnut** » Thu Nov 17, 2005 4:01 pm

show some pixz....
i have ah P08

RMS · Post by **RMS** » Thu Nov 17, 2005 11:35 pm

what i am interested in is this: the jdm ecus have different ic outputs (not talking about wiring harness, but about ICs on the pcb) so some of the accessory outputs will not work... that is the main difference between jdm code and usdm code, really the difference between large frame code and small frame code. plus some just don't exist like the purge in case you plan on using aux outputs.

kesnut · Post by **kesnut** » Sun Nov 20, 2005 7:34 pm

all the car we get here in trindad are JDM car as we inport from Japan with Free Trade. so i have lot of P08s and p30s.
and to add to that some automatic ecus have the "74HC373 SMD Chip" in.
so if i find a way to use the s300 with our ecu, it will help lots.