ECU stopped responding-Check OBD2 Pins

[Gsullens37]

TLDR; Purchased a 2012 SI that already had a flashpro with it, having some intermittent issues lately so I tried reflashing to the hondata base tune and got the 0x04 error, tried returning to stock and got the same issue. Car cranks but won't start now. Is this a matter of the FP still being associated to the previous owner? I'm kinda at a loss here

PS: having to program the flashpro on my desktop and take it outside to the car, unable to find laptop charger at the moment

[Spunkster]

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

[Gsullens37]

Working to get my hands on a windows laptop ATM, will send as soon as I can. Thanks for the quick response

[Gsullens37]

I was able to successfully tune the car using a laptop in the car but on the hondata remap calibration I'm getting a limp mode with a 3k rpm Rev limit. As of now I'm back home with the car but anything I need to try differently moving forward?

[Spunkster]

When you datalog, what errors are there?

[Gsullens37]

I'll go back out shortly and datalog the trip. Limp mode persists even with the ecu flashed back to stock