Car hesitates when I smash on the throttle

s300 and SManager software questions & answers
Post Reply
oneslowrex
Posts: 2
Joined: Thu Nov 05, 2020 10:40 pm

Car hesitates when I smash on the throttle

Post by oneslowrex »

I am experiencing this weird problem when I smash the gas my car hesitates for a quick second before actually going it is a d16a6 block with a y8 head motor is stock I am running s300 v3 in a p28 in a crx si I posted the calibration and datalog.
You do not have the required permissions to view the files attached to this post.
DaX
Posts: 641
Joined: Tue Mar 18, 2003 3:48 pm

Re: Car hesitates when I smash on the throttle

Post by DaX »

I looked at your datalog and calibration. At the stutter (about 34.5 seconds) your ignition timing drops (from +32 deg to -4 deg) and your injector duty cycle jumps up (from 3.88 ms to 21.44 ms).

I haven't messed with the soft rev limiter before, but I would try moving the power reduction slider all the way to the left ("none"). Not sure how that would impact your car because you aren't near the rev limit. You could also try to turn off launch control and see if that helps.

Again, you're not in this area of the map when the car stutters, but on both timing maps your high vacuum columns in high RPM go from +44 to -4 deg. I would change this back to match the stock map.
oneslowrex
Posts: 2
Joined: Thu Nov 05, 2020 10:40 pm

Re: Car hesitates when I smash on the throttle

Post by oneslowrex »

Thank you i will try tomorrow and let you know
Post Reply