Since new update can’t upload a tune

Sayanythng · Post by **Sayanythng** » Tue Sep 01, 2020 7:26 pm

2020 type r jail broken sent the ecu in been using the 91 octane tune before the latest beta update now I cannot upload a new tune with the updated setting Honda type r 2017+ is the only option I get this error

Sayanythng · Post by **Sayanythng** » Tue Sep 01, 2020 7:32 pm

I believe is issue is you guys don’t yet have an updated model configuration so what do the 2020 guys do now?

Sayanythng · Post by **Sayanythng** » Tue Sep 01, 2020 8:07 pm

Update: Tried reinstalling still no luck

Post by **Hondata** » Wed Sep 02, 2020 9:25 am

Close the calibration then re-open the calibration with the FlashPro plugged in.

Post by **Spunkster** » Wed Sep 02, 2020 9:26 am

Make sure you have the FlashPro plugged in with the ignition in the on position when opening a calibration and it should work.

Sayanythng · Post by **Sayanythng** » Wed Sep 02, 2020 11:00 am

Spunkster wrote: Wed Sep 02, 2020 9:26 am Make sure you have the FlashPro plugged in with the ignition in the on position when opening a calibration and it should work.

Flash pro plugged in to Laptop. New calibration configured. Plugged flash pro into car from laptop With ignition on. Same error

Post by **Spunkster** » Wed Sep 02, 2020 11:22 am

post your calibration.

Sayanythng · Post by **Sayanythng** » Wed Sep 02, 2020 3:51 pm

Spunkster wrote: Wed Sep 02, 2020 11:22 am post your calibration.

Post by **Spunkster** » Wed Sep 02, 2020 4:44 pm

not a picture of the new calibration window. We need you to post the actual calibration you are using.

Sayanythng · Post by **Sayanythng** » Wed Sep 02, 2020 5:19 pm

Spunkster wrote: Wed Sep 02, 2020 4:44 pm not a picture of the new calibration window. We need you to post the actual calibration you are using.

I can’t post one because The flash pro is cleared I’m trying to upload a new calibration.....
First picture shows what
what’s flashed on the ecu
Second pic shows Nothing on the flash pro

Post by **Hondata** » Wed Sep 02, 2020 5:24 pm

We have fixed this issue and are doing another release now.

Sayanythng · Post by **Sayanythng** » Wed Sep 02, 2020 5:26 pm

Here’s the old calibration but is the one I’m using. I reopened it. And it will download to my pro I just can’t do a new calibration because I get promoted the error

Sayanythng · Post by **Sayanythng** » Wed Sep 02, 2020 5:30 pm

Hondata wrote: Wed Sep 02, 2020 5:24 pm We have fixed this issue and are doing another release now.

Ok in the next week? Since I have you here the highest octane fuel I have already at the fuel pumps is 92 octane. I notice when I select 92 the drop down says Mexico us 17-18. Is that possible elevation would be the reason for the octane should I try that calibration?

Post by **Hondata** » Wed Sep 02, 2020 5:45 pm

I'd use a 91 octane calibration for US 92. Where do you still get 92 octane?

Release will be done today.

Sayanythng · Post by **Sayanythng** » Wed Sep 02, 2020 5:54 pm

Hondata wrote: Wed Sep 02, 2020 5:45 pm I'd use a 91 octane calibration for US 92. Where do you still get 92 octane?

Release will be done today.

Oregon only haS 92 octane from the pump no 93 available

Hondata

Since new update can’t upload a tune

Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune

Re: Since new update can’t upload a tune