Won’t datalog correctly

[Chrissq5]

So I’m version 3.6.0.0 and I’ve been trying to do some logging. So once I hit the datalog button I’ve noticed that the light stays solid instead of it flashing which I know it normally flashes. And once I click the button again and go check if it logged. It’s in the datalog page but the datalogs for example only have 1920KB when it usually has about 72,320KB when I do a 3rd gear pull. I want to put that I don’t have my traction off because one of my TPMS aren’t working so I’m not able to take traction off but I don’t know if that can cause the problem of the datalog not being completed.

[Spunkster]

Have you tried deleting all datalogs and trying again? Datalog size will vary depending on the length of the datalog. TPMS will have nothing to do with datalogging.

[Chrissq5]

Yes I have deleted all the datalogs and it still does the same thing

[Chrissq5]

Have you tried deleting all datalogs and trying again? Datalog size will vary depending on the length of the datalog. TPMS will have nothing to do with datalogging.

Yes I have deleted all the datalogs and it still does the same thing. Do you think it can be an update issue? Cause I recently updated the flashpro and once I did, it started to do it.

[Spunkster]

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.