2012 Honda civic si knocks

FlashPro Manager software
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Honda civic si knocks

Post by EFICU »

Okay good. I just wanted to make sure they are just little crackles which is normal, especially with really small throttle input like you mention and gear changes/decels.

Yeah use 8.1. Since the ones above that had a little more crackle I am just going to stick with the 8 number and make variations of that. I'm hoping to stop the knock during the shift on the 3-4. Seems to only do it when it's really hot, but we'll keep an eye on it.
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

Yeah its not as hot today
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

The 8.1 have knocks
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Honda civic si knocks

Post by EFICU »

The 3-4 gear change again only? Or in other areas too?
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

Im upload it now
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

yes 3-4 wot
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Honda civic si knocks

Post by EFICU »

Okay I think I may have figured out where and why it's doing it. I made some changes to keep it from going into the area where it is causing the gear change knock. Give this one a try.
AGP7827.SD.Rev08.2 (Blended).fpcal
You do not have the required permissions to view the files attached to this post.
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

will do
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

was driving crazy doing pulls in each gear
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Honda civic si knocks

Post by EFICU »

Well, progress anyways. No knock between shifts, but a couple during some of your pulls. I went ahead and took a bigger swing at the ignition in the areas of knock. I was trying to creep up on it, but this time I took a little bit bigger swing at it. Give this one a try, we should be good on this one.
AGP7827.SD.Rev08.3 (Blended).fpcal
You do not have the required permissions to view the files attached to this post.
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

seen one
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Honda civic si knocks

Post by EFICU »

This one was in a whole new area, so I took some out there as well. At least still nothing on the gear change or on the high cam. This one should do the trick then.
AGP7827.SD.Rev08.4 (Blended).fpcal
You do not have the required permissions to view the files attached to this post.
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

was a raining day coulnt data log much yesterday
You do not have the required permissions to view the files attached to this post.
EFICU
Posts: 3293
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2012 Honda civic si knocks

Post by EFICU »

Okay I think we're finally there. I don't see any knock in those datalogs. You had a lot of pulls in those datalogs with no knock, so I don't see you having any issues. Make some datalogs for fun over the next week or so and if you see some knock let me know. If not, it looks like it's good to go.
AGP7827
Posts: 59
Joined: Wed Aug 28, 2019 5:24 pm

Re: 2012 Honda civic si knocks

Post by AGP7827 »

i had a knock in #2 but didnt record it but other than that its fine
Post Reply