matt I need your help asap.

bossman032 · Post by **bossman032** » Wed Oct 05, 2005 8:04 pm

Hey Matt,

My car had been running perfect till on day it fucken stopped working. I thought it was the wiring, I checked over the wiring many, many times. I even called you to get the Kpro tested, you said it might be the wiring. I checked and checked never thinking the kpro might be bad.

till today I find out that the kpro one of the pins got burned.

Please advise, my car has been running ever since I got the kpro like about nearly two years with no problems. Till a few weeks ago.

I don't know how it got burnt. I certainly know I didn't do anything because it just stopped working on its own.

so Matt please let me know can I get it sent in and fixed.

http://pg.photos.yahoo.com/ph/bossman03 ... pg&.src=ph

link to my car.

Pin Location E3 Logic Ground "Ground for ECM Control Circuit" Less than 1.0 V at all times

Post by **Spunkster** » Thu Oct 06, 2005 9:16 am

Please send the ECU to us for testing. Fill out the problem report located at http://www.hondata.com/downloads/K_Problem_Report.doc

Make sure to include you contact details and return shipping info.

It sounds like you may have a problem with the grounds or the way the main relay is wired up. It is possible this has damaged the ecu.

bossman032 · Post by **bossman032** » Thu Oct 06, 2005 9:39 am

thanks for the speedy reply.

I have no clue what caused the problem. I have been using the ECU for 1 years plus, now maybe longer. 8-2-04 is when I got it done.

I will express mail it to you guys can u guys express mail it back?? I spend about 2 weeks trouble shooting the wiring!!! Everything was getting power and thing but no spark.

let me know..
ronald

bossman032 · Post by **bossman032** » Thu Oct 06, 2005 2:24 pm

ecu has been sent.

please get it fixed asap.

ronald