Hi all
I'm hoping for some help from the pros on here!
Car: 2002 UKDM CTR, K20A2, Rotrex C30-94, Kpro4.
Car has been supercharged for 3.5 years, no issues.
Recently removed gearbox to fit an LSD, replaced starter, broke the knock sensor. Replaced with a cheap aftermarket one, car instantly started showing knock (has never had this issue before) replaced that with a Ktuned knock sensor, same issue.
The only other thing we changed was a Powerflex gearbox mount insert which has now been removed = no change.
Tuner lives quite a distance away, has adjusted map (see modified kal) to remove timing, still showing knock. He is convinced it's phantom, I can't work out where it' suddenly appeared from.
Any help/advice appreciated. I am losing my marbles chasing this around! Happy to supply anything further needed.
Original Kal + Knock knock log
Modified Kal + knock knock pt2.
Sorry for the massive datalogs!
Thanks
Phantom knock, or not?
-
Butter Face
- Posts: 3
- Joined: Mon May 09, 2016 12:36 am
Phantom knock, or not?
You do not have the required permissions to view the files attached to this post.
-
Butter Face
- Posts: 3
- Joined: Mon May 09, 2016 12:36 am
Re: Phantom knock, or not?
Just to clarify, knock only occurs in higher gears with load on the engine, almost bang on 4500rpm each time. Doesn’t seem to happen on WOT.
Re: Phantom knock, or not?
I would recommend that you get an OEM knock sensor and see if it works normally. The cheap knock sensor may just be faulty.
-
Butter Face
- Posts: 3
- Joined: Mon May 09, 2016 12:36 am
Re: Phantom knock, or not?
Hi Spunkster, thanks for that. I did consider it but I assumed the Ktuned one would be superior even to the OEM one?