Kpro with a K24a2 question about FLash..

[bossman032]

Ok guys,

I have a kpro ecu. I was wondering is the TSX Flash on my KPRO ECU?

because I wanna use the tsx flash because I saw the gains were very good.

what I see is the k24-tsx-stock on the kpro is that the same as the Flash that goes for $595.

please let me know..

ronald

[bossman032]

anyone??

[locash]

I highly doubt the TSX map in the K-pro is anywhere near the same as the reflash that is designed for a stock TSX ecu. With the K-pro maps, all will need further tuning for your particular setup..

[bossman032]

the reason I asked was because.

the tsx flash has very good gains.

and I wanna use that cal file. I don't know why hondata doesn't have that version on kpro ecu instead of a base map..which sucks..

I want something like that flash intake, headers,exhaust tunned map.. like the tsx flash!!!!!

[locash]

There are many reasons why they don't include the reflash programs with the K-pro. The reflashes have many many hours of tuning into them, and are designed for a certain ecu and engine combination. The K-pro is sold as a completely programmable engine management system, not as a pre-tuned unit. You are supposed to have the K-pro tuned to your combination, and the maps that are included are to be used as starting points. Another problem with your particular scenario is that the reflash in question was designed for a TSX ecu, which is not the same as an RSX/Civic Si/CRV ecu, and therefore, the program can not just be imported.. Obviously they did not tune a TSX on a K-pro ecu, as the K-pro board does not currently work with the TSX ecu..

Hopefully I made sense.. :)

[bossman032]

yes thanks.



I would be nice to have something similar to the rsx type S engines tunned cal files with headers,intake,exhaust.

later on the line when they get the ecu combos working..