Acting odd around 5500 rpm

K-Series Programmable ECU installation questions / support issues
Locked
Travisk0024
Posts: 2
Joined: Fri Sep 23, 2005 2:37 pm
Location: Key West

Acting odd around 5500 rpm

Post by Travisk0024 »

I have a 2003 RSX and it is turbo charged with a REVHARD turbo and when I get to about 5500 rpm's I feel like I lose every thing it makes a realy strange noise and it gets car feels bogged down. when and after this happens my check engin light startes blinking but there on code that I can see and it is not like when it is telling me there is knock. I am running the basic revhard program that you all gave me and I have some data lodding of when it happens so can some one please help
You do not have the required permissions to view the files attached to this post.
Razathorn
Posts: 469
Joined: Tue Jun 14, 2005 12:17 am
Location: Lenexa, Kansas, USA

Post by Razathorn »

Well... it certianly sounds like knock -- pretty bad knock if you can really feel it like that. You should datalog and remove ignition where the knock is at. When the MIL flashes because of knock, no code is stored. The only way to identify knock that causes the MIL to flash is to datalog and monitor knock count.

Wayne
User avatar
Hondata
Site Admin
Posts: 10616
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

You need to tune the AF for your setup - the long term fuel trim is at -17% and the car is running very rich. There is knock but the datalog does not show where.
Hondata
Locked