Hi all. I recently got flashpro for my 07 Si with a K&N SRI and Vibrant exhaust. I flashed the K&N SRI MAP based tune and did a few WOT pulls and noticed it is running a bit lean. From the datalog attached, it seems like it is high 13s at WOT with jumps to 14 A/F. I have tried using the stock, tuned basemap and have the same problem. On this particular log, I got no knocks and the car feels a lot peppier than bone stock, but I am worried about high cylinder temperatures leading to long term damage.
Can someone take a look at the log and tell me if everything looks okay, or if it is in fact running an unsafe A/F?
07 Si Basemap Lean at WOT
07 Si Basemap Lean at WOT
You do not have the required permissions to view the files attached to this post.
Re: 07 Si Basemap Lean at WOT
Hi,
Yes it is too lean in the wide open throttle areas. If you'd like I can help you richen it up and dial it in better if you send me the file you're running on.
Yes it is too lean in the wide open throttle areas. If you'd like I can help you richen it up and dial it in better if you send me the file you're running on.
Re: 07 Si Basemap Lean at WOT
Thanks man. Here is the basemap I was using.
You do not have the required permissions to view the files attached to this post.
Re: 07 Si Basemap Lean at WOT
Check your PM's.
-
GhostGreyFg2
- Posts: 1
- Joined: Sat Mar 23, 2019 8:54 am
Re: 07 Si Basemap Lean at WOT
Try this Basemap
You do not have the required permissions to view the files attached to this post.