MAP pressure seems incorrect at WOT

FlashPro Manager software
Post Reply
schaffertnathan
Posts: 21
Joined: Thu Jun 28, 2018 6:31 am

MAP pressure seems incorrect at WOT

Post by schaffertnathan »

What factors affect MAP pressure at wide open throttle? Looking at my datalog, my MAP reading hangs around -1.1 at high rpm, shouldn't it be closer to 0? Am I losing power since it's not as close to 0? If someone could give me all the factors that affect MAP pressure, I would greatly appreciate it!

I have a 2012 Civic Si, with intake and 3 inch full exhaust. I have a silencer on the exhaust tip, if that affects anything. I have also attached a datalog of a 3rd gear pull to see, if someone could please guide me in the right direction!
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: MAP pressure seems incorrect at WOT

Post by Spunkster »

IT can be cased by restrictions and also by higher altitude.
schaffertnathan
Posts: 21
Joined: Thu Jun 28, 2018 6:31 am

Re: MAP pressure seems incorrect at WOT

Post by schaffertnathan »

My buddy has a 2015 civic si, and his MAP pressure reaches around -0.3 at high rpm wot. Could the silencer on my car be affecting the pressure that much? Or I was also thinking maybe the cam angle is not optimum? Can anyone tell if my cam angles look good just by reading the datalog?
schaffertnathan
Posts: 21
Joined: Thu Jun 28, 2018 6:31 am

Re: MAP pressure seems incorrect at WOT

Post by schaffertnathan »

Spunkster wrote: Tue Feb 05, 2019 12:17 pm IT can be cased by restrictions and also by higher altitude.
Post Reply