i have a question is there a way to prevent codes from coming on when on the dyno i heard there is a maintenance mode that the car can be put in when i got my car dyno all vsa light came on and i just want to make sure its not holding the power back
On the FK8 in R mode you can hold the VSA button for 10 seconds to disable the VSA completely, which will prevent errors. It should work for the FK2. Otherwise you have to do the pedal dance as outlined above.
thank you u so much i know that the car can be put in a maintenance mode and the u car spin the front wheels with no light but i will try the steps for the vsa and show my tuner the rest
On the FK8 in R mode you can hold the VSA button for 10 seconds to disable the VSA completely, which will prevent errors. It should work for the FK2. Otherwise you have to do the pedal dance as outlined above.
When I turn VSA in R mode, will be able to do a run in comfort mode without errors? I want to compare power levels in all modes.
Yes you can used the e-brake after doing the pedal dance, but eventually you may get an error condition and have to clear the errors and do the pedal dance again.
oh i see u have to do the pedal dance lol i was just holding the traction control down and waiting for the vsa to say it is full turn off guess i wasnt doing it properly
