Hondata

Hi - do UK flashpro owners need to send there ecu`s to hondata to enable boost control - or can UK dealers do the mod to the ecu

Thanks

Hi, do you remember if boost cut for the s2000 worked on version 1.1.67 i enabled it for the first time and nothing happened - cut was set at 14psi and data log showed 14.9psi with nothing happening

Thanks Terry

Hi is there anything you can adjust in flashpro to stop the revs hanging when changing gear ( mainly noticeable on low cam driving slowly off boost ) -its very irritating - i have not supplied data log as it would not show anything - car is a euro s2000 turbo charged running rc650cc injectors - any ...

Hi - has this been solved in flashpro manager for the euro s2000

Thanks

Hi was the standard fuel pump used for this tune ? also do you know the limits of the standard pump - as finding an upgraded pump for the 2006+ s2000 is not easy - they are different to the early s2000`s

Thanks Terry

Anyone ?

Hi maybe i am missing something or doing something wrong ? - when i read my datalogs on a boosted s2000 the lowest corrected AFR only goes down to 12.25- stock AFR is 10.14 at this point which is not very helpful for road tuning - have added a datalog -calibration - this is on a 2008 euro s2000 ...

Hi is it possible to get the MIL to flash when knock is detected ?

Thanks Terry

1.1.6.7 was the beta at the time and this cured it from the previous software - i am guessing - but i think they may have left the cure out in the latest release ? hondata are very helpful so they will sort the issue out im sure - for now i will stop on old soft ware :)

Cheers Terry

Ps Go TURBO ...

Hi I am using 1.1.6.7 software and all is ok on this - just thought i would let you know

Cheers Terry

As Requested - thanks for your help

Hi posted datalog and now calibration - hope this is ok - am new to this sorry

Thanks..........

Could this be a error in flashpro software ? ecu is stock when datalog taken . uploaded stock setting and still the same reading #1 100 knock count

Thanks ..........

datalog enclosed car is standard 2008 s2000 euro 25k miles

Thanks .....

Hi just thought i would try my new flash pro out and do a data log on my standard euro 2008 s2000, it reads 100 knock count on number 1 cylinder straight from firing it up and keeps the reading the whole data log - no knock on any other cylinder - showing some knock retard as well in places - is ...