Hondata

i am not using hondata. i am using a virgin jdm p30. is there any way to get aroung the knock sensor? like different ecu or some type of bypass or simulator? and what types of problems would the lack of a knock sensor cause?

ok as of now all wiring issues are fixed. i still get codes 23 and 20 on the cel. the car has some new symptoms. under heavy acceleration the car will hesitate and start rapidly back firing. the idle also changes randomly it will idle fine then fall for about 10 seconds then pick back up and some ...

the car keeps blowing the turn signal/tach fuse!

where is the eld? how do i fix it?

i installed a fuel pressure gauge today and i have good pressure. 45 psi with the vacuum hose disconnected. but car is still acting weird. sometimes it will idle at 1200 rpm when warm, and some times it will idle around 500 rpm and the idle is rough. i have checked and rechecked for vacuum leaks and ...

i got to the point of counting the lights and i get 2 long flashes with a pause in between then it pauses for a little longer then before and gives 2 more ling flashes then 3 short. i cant tell if it is saying codes 20 and 23 or just code 43.

ok so i swapped out my o2 and rewired the car for a 4 wire o2 and that has solved my fuel issues and the car runs great. but now after about 5 minutes of driving i get a check engine light. how do i read the code!? i have an obd1 motor and ecu with a jumper harness. I cant figure out how to read the ...

i have a honda crx with a jdm b16a2 has some bolt ons (intake, throttle body, exhaust, fuel rail and fuel pump) running on a p30 ecu (virgin).

My first problem is the car runs like crap. it starts beautifully and usually idles pretty good, and it drives ok for about 5 minutes after i start it ...