Hondata

bump , i have the same request , is it so much complicated to add the gear ratio table fr these carsa 07 tsx? we can live without flat shift ok , but changing gear ratios and losing the cruise and proper per gear tuning is frustrating , arent there many tsx owners interested in this opton?
thank you

i can confirm this , i tuned a boosted edm cl9 recently with usdm ecu , and when the primary o2 failed , i disabled it and after that i had a -10% trim constant , i just added 10% in all the fuel maps , and when we replaced the o2 and enabled closed loop , i just removed the 10% , it didnt bther me ...

I ve been following this thread , i ll be tuning a edm ctr fk8 with aftermarket turbo soon , everything was ok with stock turbo till 390 whp , will see if we an duplicate the problem


i had the same exact problem with boost command not going over 25psi with an edm fk8 with mhi turbo , xdi pump ...

Disable all live tuning. Disable the fuel pump limit. Increase the wastegate flow table. Increase the throttle table to 600 nm on the top column.

since he is using a larger turbo , does the compressor efficiency map play any role in reducing bpcmd ? since you suggest to increase the wastegate ...

Hondata wrote: Mon Mar 25, 2024 8:55 pm Can you send the calibration and datalogs?

i think they are in the previous page , civicvti has uploaded them

I ve been following this thread , i ll be tuning a edm ctr fk8 with aftermarket turbo soon , everything was ok with stock turbo till 390 whp , will see if we an duplicate the problem

hello i cant find a 37820-rbb-a21 for a customer with manual edm cl9 , so i will opt for the a/t a71 and lose the reverse lockout , so i ll then use the tsx flashpro and can adapter cable https://hondata.com/flashpro/flashpro-tsx , i see the above posters there was a problem with immo , did you ...

I will do it tommorow when the customer comea back to know wjat works or not for the next time i one across the issue , but i ll likely put a oem ecu becaise he lives 300km away and dkesnt have time for testing.
If it helps we flash the usdm civic si ecu (for boost control) with the international ...

.

If i go to a honda dealer and he tries to reflash the hondata ecu with oem file would it work? And then he d have to programm the immo again also i guess , since now it is off

Hello
Euro fn2 has one of tje hondata early reflashed ecus..
I ttird to lock a new flashpro to remap the car , i thought it would overwrite the tune or consider it the stock one to save .
I am getting tmessages ,that it may not be able to complete ans then i d have to send ecu and flashpro to ...

same thing with euro fk8
viewtopic.php?p=135981#p135981

it is exactly the same problem , but with the fl5.
https://hondata.com/forum/viewtopic.php?t=27473

i second that , i connect to many kpro units every week , it was the easiest trouble free system to connect to , instantly every time , this month i ve had 3 different vehicles edm ep3 , that the ecu would connect but freeze during the upload , or didnt respond and the software would close , i used ...

hel;lo , seriously interested but you need to share more info and pics , and pricing , i have a high hp fn2 customer that would buy it if he sees info pics and or video of it working , help us and we ll help you