Hondata

I now have it working correctly with version 8 of AVG... Simply downloading and installing the new version won't fix it though. You have to add an exception in the resident shield options... The update to version 8 is necessary though because version 7 does not have the option for allowing ...

post the cal file as well.

Yes i did cut the ELD wire, but did not disable ELD in the software.. I assumed that you have to keep it running to get a reading. I will diasable it and see if the error code goes away.

On another note, in my search for a solution to this problem i came accross several posts where people have ...

darknight wrote:When you hook up the 0-5v output from the wideband meter the ELD on the hondata,
do you have to "disable ELD" in the parameters?

Also do you have to remove resistors (R136,R138)?

Yes, disable it.

I'd recommend it.

Did you disable ELD in the software?
Did you make sure you CUT the ELD wire and not splice the wideband wire into it? You must the ELD completely then wire your wideband directly in.

post a cal.

C_Rock77 wrote:So...you're saying the stock O2 sensor input can't handle 0-5V input?

correct, use the ELD

ITR 1102 wrote:I am on XP as well. It did not pick it up immediately, but as soon as I tried to open SManager the first time it did not like it.

Hmm, interesting. It's nice in the 8 version you can now add where in 7 you could not.

I have confirmed that the new version fixes this issue on both of my PC's.

Download 8 here.

http://www.download.com/AVG-Anti-Virus-Free-Edition/3000-2239_4-10320142.html?part=dl-AVGAntiVir&subj=dl&tag=button

or here

http://www.grisoft.cz/filedir/inst/avg_free_stf_en_8_100a1295.exe

I now have ...

I have confirmed that the new version fixes this issue on both of my PC's.

Download 8 here.

http://www.download.com/AVG-Anti-Virus- ... tag=button

or here

http://www.grisoft.cz/filedir/inst/avg_ ... 0a1295.exe

albastiki wrote:Hi there, does any one know the proper scaler and offset for the hondata 4 bar? thanks

Its a preset in the software. You most likely don't have the new version. Make sure you check for updates.

eikki wrote:Now tried original MAP sensor and everything works. So there is the problem.

What settungs must i use for GM 3 bar sensor?

The motec sensor should be a good start. Check the wiring as well on the 3 bar.

Hello
My car won't idle. I must hold the gas pedal then everything is fine. If i let off then it dies.

motor b18c6, CR 8.9, 750cc injectors, sc6152sp turbo
gm 3 bar

I don't understand what would be the problem.

Try turning down your overall fuel trim.
move the iac duty cycle to just above ...

4thGEN wrote:has anybody used the omni 4 bar on the s300? or will it even work? thanks.

Its the same as this one.
http://www.hondata.com/4barmap.html

furthermore, it's a pre-selected sensor in the sensor list.

PLease post what you did.

ocase22 wrote:

Spunkster wrote:What ecu are you using? Have you changed the settings in the software?

He said he cut the ELD wire, does that mean he still needs to disable ELD in Smanager? I would assume not just checking..

Yes, you MUST disable it in the software.