Hondata

thanks

ralf

hi,

befor i install the hondat k pro, when i close the car with the key, the flasher flashing one or three times. now after hondata kpro, this is not working.
is the problem something with the kpro?
sorry for the bad english. i hope you understand it.

regards
ralf

:D :!: :!:

perfekt thanks

Regards
Ralf

Thanks for the help :D

Sometimes i have th error code secondary O2 sensor. I use not the stock catalice converter.
But i use a 400 cells cat.
Is there a function to cancel this problem?

Thanks

Regards
Ralf

Hi

what musst i do, that the green key in the speedometer is away?
Thanks

Regards
Ralf

Thanks, perfect

:D

Hello

i want to chnage the map sensor . i will use a hondata 4bar sensor.
when i go to
Parameters, then > MAP > then replacement MAP sensor > Quick select > Hondata Omnipower 4bar

and i change then to "Tables" i see only a scale wichever goes only up to 12PSI

but when i use a 4bar MAP sensor the ...

so the OEM map sensor is only a 10psi sensor. i doesnt know this.
the map sensor until year 2000 is a 1.75 bar map sensor. so read to 0,75 bar boost . 0.75 bar is 10.7psi.
so the EP3 map sensor is only 1.7bar or 10psi map sensor. ok, this illustrate it.
Thanks for the information.

regards
Ralf

no one have a idea??!!

Hi

I detected following.

I drive the car with full throttle. I detected that the datalogging from the k pro shows a maximum boost of 10.2 psi.
concurrently i test the boost with a extern calibrated boost gauge.
at the same time the gauge shows 12.6 psi.
why the difference?

regards

i have tuned it now. when i know what i must do, it is easy . thanks for the informations.

regards

Please watch some of the training videos at http://www.hondata.com/techk-protraining.html

There is more than one map for ignition when vtec is engaged. There is one for 0,10, 20, 30, 40 and 50 degrees fo cam angle. If you are not modifying the correct table you will not see a change when the car ...

i have two prblems. first my bad english and second that i tuned only hondas until year 2000.
it is easier unterstand things in the language wich spoken all day.

sorry

regards

You must make sure you are changing the High cam map for the cam angle the engine is running at the time you are seeing the need for a change.

i dont understand. i change the ignition at the vtec map. you see at 12 psi for example from 16 to 21. so 5 degrees more.
and when i do a test drive, the ...