Search found 14 matches

by shortstop
Wed Jan 19, 2011 1:27 pm
Forum: K-Series Reflash
Topic: reflash for 2008 tsx?
Replies: 8
Views: 9817

put me on a list for reflash or kpro for 07 AT when you get it
by shortstop
Fri Nov 27, 2009 11:44 pm
Forum: K-Pro / KManager
Topic: lean when letting off throttle 32.67 to 1 RED
Replies: 2
Views: 2273

it is normal. nothing to worry about.

if you let the throttle off you will only get air through the engine without any fuel. so you will have, for the wideband, a very very lean mixture.

there is, for sure, nothing to worry about. just let it be ;)

best regards Luke

Thanks for the ...
by shortstop
Fri Nov 13, 2009 8:11 pm
Forum: K-Pro / KManager
Topic: lean when letting off throttle 32.67 to 1 RED
Replies: 2
Views: 2273

lean when letting off throttle 32.67 to 1 RED

Just got my kpro and trying to learn on it without messing it up. My car is an ep3, cai/rh/e with the hi octane tune. A/F when floored is 13-14 to 1. When letting off to 0% throttle it jumps up to 32.67 and is red. Wasnt sure if this is normal. Hopefully i can learn some more on here before further ...
by shortstop
Tue Oct 13, 2009 4:26 pm
Forum: K-Pro / KManager
Topic: kpro ignition off
Replies: 8
Views: 4651

If you'd like to send it to me, I can gladly test it for you.. No charge (other than shipping of course)..

I would apprecate this very much. shortstop12088@hotmail.com or 402 297 5716 Jay



Also, spunkster if im not able to send it to locash, i'll definitily send it your way. Appreciate the help ...
by shortstop
Fri Oct 09, 2009 3:40 pm
Forum: K-Pro / KManager
Topic: kpro ignition off
Replies: 8
Views: 4651

What vehicle is this in and what has been done to it?

Have you tried the ECU in a known good car?

2004 civic si. Yes it has been tried in another car but not another car with a person already having kpro. Kpro had a turbo tune on it from a k20 ek hatch. Can't select any tabs to get rid of that ...
by shortstop
Sat Oct 03, 2009 7:34 am
Forum: K-Pro / KManager
Topic: kpro ignition off
Replies: 8
Views: 4651

kpro ignition off

I have checked everythign from the lights, the ground, etc. When the kmanager is on i can't get the ignition to turn on.(with the key forward in the on position)

None of the tabs are clickable (can't disable immobilizer, load new map, etc)

Can i have my kpro inspected if sent in?
by shortstop
Wed Sep 09, 2009 4:01 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

no dice, im gonna recheck the wiring from the actual harness and see if the hks grounding kit is just weak. :(
by shortstop
Tue Sep 08, 2009 7:40 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

Spunkster wrote:have you relocated the ground as the instructions say?
yes and still nothing. Im tryin a new wire/computer to see if that helps. I'll let you know.
by shortstop
Fri Sep 04, 2009 6:56 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

ttt
by shortstop
Mon Aug 31, 2009 7:59 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

Have you relocated the ground per the instructions?

http://www.hondata.com/techk20ground.html

No. I have the stock a3 and hks circle earth ground kit. You don't think i need that update on the kpro? I am double checking the grounds in a minute. Just curious if i have to spend the cash on the ...
by shortstop
Mon Aug 31, 2009 4:05 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

im assuming they are using the last 4 numbers? So i need the $250 upgrade?

http://www.hondata.com/kprodatalogging.html
by shortstop
Mon Aug 31, 2009 3:50 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

Spunkster wrote:What is the K-Pro serial number?
under the bar code on the inside it says 05001456
by shortstop
Sun Aug 30, 2009 6:54 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

im thinking this could be my problem.

http://www.hondata.com/immobilizer.html

I drive with my ecu to the Acura dealership, they take my vin and enter it in the ecu, i load up kmanager and have the kpro then hooked up while they are doing this. Or do i go to honda?
by shortstop
Sun Aug 30, 2009 6:38 pm
Forum: K-Pro / KManager
Topic: bought used kpro, can't load it???
Replies: 10
Views: 5360

bought used kpro, can't load it???

not sure on serial number but i have the following info
1.3.7.0.
2004 civic si
PRB kpro
i/rh/e
Can't load kpro


I downloaded the latest kmanager after buying my used kpro. I did it with the ecu not hooked up, then i checked the lights (green steady,red flashing) so that checked out alright, plugged ...