Hondata

Same issue here, Honda Head unit Jailbroken... Hondata APK installed, pairing code set to fixed, 1234. Alternative Pairing Mode 2018+ Checked in FPM, car is indeed a 2018 FK8, but... no matter what, FlashPro will not pair. It detects in both the Hondata Mobile... and in Headunit Bluetooth search ...

Thanks for the extra information here Hondata, it is appreciated.

Steve

I had many users with this issue over the last day, even tonight I had one come back with 3.2.4. and still reporting a corrupt file so I am just scrapping the old 3.2.2 tunes and redoing them manually on 3.2.4. to avoid issues.

Just sharing as it looks like the bug is trying to hang on.

Steve

Thanks guys!

Great work Hondata, this is a huge step forward for Type R owners :)

Steve

Just a quick tip, if the calibration is good, I have seen this issue before from sticky injectors, when worn as they heat up the "latency" changes. It can usually be identified by a slowly drifting positive short term fuel trim, at idle in hot temps. Where as most fuel trims will drift negative at ...

Excellent work guys, very nice features to have!

Steve

Just to add to this, as the issue you were experiencing was during an increase (upward slope) of ignition values, I thought I would mention I have noticed that during knock retard due to knock volume, if the noise is loud enough or the sensitivity is high enough, the ECU will "freeze" ignition not ...

Thank you for the bug report. We have fixed this for the next release (V1.1.5.0).

Would it be acceptable to add an option to use all loaded datalogs (rather than just one) for fuel overlays, or would you require some way to select which datalogs are shown on the overlay?

Great!

As for the ...

To add to this,

Testing suggets it affects the values changed under "Calibration" only and not values editted under "Tables", and it only affects those values if you don't switch to a different table before loading a new datalog as in click elsewhere.

So if you enter large changes to one of the ...

Just noticed this... please advise if this is valid.

When switching between Datalog files... (ie you have more then one open)... the Calibration seems to reloaded when switching. Any changes made are lost... EVEN though there is still a * up to signify changes. Switch between two a few times to see ...

Post the cal. I was having a similar issue but not as pronounced and to fix it you need to reindex the idle columns to keep the ECU from having to interpolate so much at idle. My idle is smooth as glass with ID 1000cc injectors and 70psi base fuel pressure.

I reduced interpolation with good ...

Above results were on 1.1.4.5, I will try this again to see if works the way one might think in 1.1.4.6.

V1.1.4.6 changes:
• Fixed stock wideband voltage / lambda conversion table, which was inverted. This table will be reset back to stock with V1.1.4.6, so if you made changes to this table you ...

Just a note to others using this table, it works backwards to what you might think.

My experience with this table:

--Wrong logic explained--
As in, because 2200mV is equal to 14.7 and 1995 is 15.79, therefore you deduce assuming a linear relationship think that 2162mV is equal to 14.9.

Therefor ...

Any updates on this issue?

Thanks,

Steve