Hondata

well i have a 02 rsx type s and my brother has a 03 rsx type s with hondata kpro. his car is down and he let me use kpro on my car but i have been experiencing some issues with it.

1. With my stock ecu my car starts and idles fine. it does shake and sounds normal.

But when i install the kpro my ...

alright so i find the problem its not because i need a tune. its because one of the roller rockers is broke. thanks for the everyone for helping!!!

and btw its only knocking in cylinder 3.....and u can hear it really loud its scary 16 knock count..

will kinda of like it says i can hear loud scary loud explosion( sounds like pop corn popin). but anyways please help me out and take a look at the graph really quick

car is a 08 civic sedan
mods

tsx cams
kn intake
bc headers
and stock megan exhaust

ok i found out it was the new 1.4.1 software because i got a friends laptop with the 1.4.0 software uploaded a base map and the car started up great. no problems. Could u guys please review the 1.4.1 version it seems better and more improved versus the older 1. thank you

ok just downloaded version 1.4.1 and now the car wont start. it had a version 1.4.0 map on it. i tried to tune it again after i downloaded new version and now the car wont start. i refuse to believe the ecu is damaged becasue it start great before i uploaded the 1.4.1 version on it.

motor
k20a2 ...

i was wondering if i can get some tuning tips for the s300.

i want to knw how to tune the ignition? since most of the time every1 disables it. whats the best egt for n/a. and turbo? and things like that. its just extremely confusing and i just want a little insight on it please. and i understand im ...

i got a error code p0141 its the o2 secondary malfunction.n i dont know how to turn it of its a k20a2 in a 96 hgatch. thanks in advice

thanks

i need a base map for this setup

i have a ek with a k20a2 and the mods are following

stock injectors

intake

header

3inch exhaust

255 fuel pump(new im guessing y it wont start)

eagle fuel rail

clutch

kpro

and everything else is stock

i just need a base map for this to start the car then i ...

what size injectors. if ur stock use the 240cc 1 for a while. i got 550cc so i use the 440 map and kinda just worked it that way. as long as starts and drive use a wideband to tune it.

i would say try this switch the tps and map sensor plugs. try that and run it again just to double check. cause it looks like most of the revs u made the tps is mostly at 0 %. and hops every once in a while. just my 2 cents. it wont hurt to try man. good luck

will that basemap work even with the compression differences? thanks man.

can any1 make 1 for me i havent seen 1 yet. and im running under the b16 turbo map but its not running right. im guessing becasue o f the low compression or something. all i have is

ls/ vtec (b16 head)
57 trim t3 t4 turbo
3inch dump
255 fuel pump
and stock injectors for now. but will be 550 soon ...